How do you replace the motor mount on a 2000 Ford Focus?
Remove the radiator overflow resevoir(the clip will probably break, no big deal), jack the engine up a few inches with a floor jack, remove the bolts holding the motor mount on and replace.
My Focus vibrated when turning the wheel to the right and moving. Check the motor mount which is on the passenger side toward the rear. It has a round cap, about 4 inches wide. The motor mount will have a rubber cover under the cap, push on it, it should be filled with oil. If it is empty you need to change the mount. Jack the motor from the bottom with a floor jack a…
Loosen all of the motor mount retaining bolts. Jack one side of the 2000 Nissan engine up. Remove the retaining bolt. Remove the motor mount bushing and replace it with a new one. Do the same thing for all for motor mounts. Let the engine back into its original position and tighten the retaining bolts.
How do you fix a motormount that broke off right front of 2000 Grand Am SE when serpentine belt was replaced?
Has anyone had problems with the motor mounts breaking in a 2000 Mercury Villager I have replaced mine about 5 times now all of them and do not know why they continue to break?
Where can i find a schematic for the serpentine belt on a 2000 ford focus 2.0l sohc motor without ac?
It's not a real expensive repair, but labor costs are all over the place-for this go to a hole in the wall shop to get it done since it takes no special skills or equip. the mount is anywhere from 30-50.00 and you are looking at about 1.5 hrs labor (give or take) You can even do this yourself, all they do is loosen a few items to allow slight movement then jack up engine…