0
How do you replace the overhead console lamp and the steering wheel lamps on an Oldsmobile Silhouette?
Wiki User
∙ 17y ago
I had taken my 2000 Silhouette in for other problems and since I had it in the shop, I asked about the lamps on the overhead console and on the steering wheel remotes for the radio. They told me that the lamps are not replaceable, but the whole switch has to bed replaced. I thought that this was quite a bummer.
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
What are the wiring connections for the overhead console of a 1999 Dodge Durango?
The 1999 Dodge Durango overhead console wiring connections are beneath the overhead console. You will need to remove the overhead console?æin order to access the wiring connections.
Where can you purchase a overhead console light for a 2005 dodge caravan?
In ebay.com, search by overhead console.
Remove the overhead console on s-10 blazer?
how to I remove the overhead console on the S 10 Blazer?
How can you remove the Overhead console in a 2007 dodge ram?
To remove the overhead console you will first need to disconnect and isolate the negative battery cable. Remove the overhead screws and pull straight down on the console.
Camry overhead console removal?
Remove the Toyota Camry headliner. The overhead console retaining screws will be visible. Remove the retaining screws and the console will come off.
2003 expedition overhead console rattle?
Take overhead console apart and look inside for any thing loss. It maybe as simple as a clip.
How do you remove Tahoe overhead console?
You will need to remove the headliner. With the headliner removed you will be able to see the overhead console retaining screws. Remove the retaining screws.
How do you disassemble overhead console in 94 Chevy Suburban?
Remove the screws that hold the headliner in place. With the headliner removed the overhead console retaining bolts will be visible. Remove the retaining bolts. Remove the wiring harness from the console.
How many computers are in a 1994 jeep grand Cherokee Laredo?
Engine, trans, abs, airbag, cluster, overhead console, information center,Engine, trans, abs, airbag, cluster, overhead console, information center,
2003 dodge ram overhead console removal?
I googled "04 Dodge Ram Manual" and downloaded the service manual from one of the links, which is different than the owners manual. The service manual is 2000+ pages long....here's what is says about the overhead console removal procedure....REMOVAL OVERHEAD CONSOLE REMOVAL (1) Disconnect and isolate the negative battery cable. (2) Remove the overhead console retaining screws, located in the sunglass storage bin. (3) Using your fingertips, grasp the sides of the overhead console and pull straight down evenly to disengage the two snap clips at the front of the unit. (4) Lower the overhead console far enough to access the wire harness connectors. (5) Disconnect the EVIC, CMTC electronic module and the reading/courtesy lamps electrical connectors. (6) Remove the overhead console from the vehicle. INSTALLATION (1) Position the overhead console in the vehicle. (2) Connect the EVIC, CMTC electronic module and the reading/courtesy lamps electrical connectors. (3) Grasp the sides of the overhead console and push straight up evenly to engage the two snap clips at the rear of the unit. (4) Install the overhead console retaining screw, located in the front of console. Torque the screw to 1.2 N·m (10 in. lbs.). (5) Connect the negative battery cable. I googled "04 Dodge Ram Manual" and downloaded the service manual from one of the links, which is different than the owners manual. The service manual is 2000+ pages long....here's what is says about the overhead console removal procedure....REMOVAL OVERHEAD CONSOLE REMOVAL (1) Disconnect and isolate the negative battery cable. (2) Remove the overhead console retaining screws, located in the sunglass storage bin. (3) Using your fingertips, grasp the sides of the overhead console and pull straight down evenly to disengage the two snap clips at the front of the unit. (4) Lower the overhead console far enough to access the wire harness connectors. (5) Disconnect the EVIC, CMTC electronic module and the reading/courtesy lamps electrical connectors. (6) Remove the overhead console from the vehicle. INSTALLATION (1) Position the overhead console in the vehicle. (2) Connect the EVIC, CMTC electronic module and the reading/courtesy lamps electrical connectors. (3) Grasp the sides of the overhead console and push straight up evenly to engage the two snap clips at the rear of the unit. (4) Install the overhead console retaining screw, located in the front of console. Torque the screw to 1.2 N·m (10 in. lbs.). (5) Connect the negative battery cable.
What problems would a bad ambient air sensor in 06 dodge 1500 do?
Check engine light and an improper reading in the overhead console.Check engine light and an improper reading in the overhead console.
How do you reset the overhead console to show gas used and range?
Press the button.
