answersLogoWhite

0


Best Answer

You must ffirst remove the passenger tire and the splash guard behind it. Its just a few screws. You will then be able to see the Power Steering pump. Remove the belt followed by the power steering pump hose. The pump is held in place by three screws. Remove them and put the new pump on in its place. It may be easier to install the hoses before mounting the pump. that's the tricky part. Its not hard to do at all, but you will be working in a cramped space. Put your belt on, your splash guard and tire. Now fill w/ ATF not power steering fluid (why? because the owners manual says so... don"t believe check for yourself..) Finally, start the engine and turn the wheel from left to right (all the way) about five times both ways. this works the fluid in. No need to bleed. Check the reservoir and you willl notice less. continue to add turn thw wheel until its stops dropping. Job done... michajohns3@AOL.com

User Avatar

Wiki User

โˆ™ 2011-09-12 21:01:44
This answer is:
User Avatar
Study guides

Add your answer:

Earn +20 pts
Q: How do you replace the power steering pump on a 1994 6-cylinder Camry?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you remove and replace the power steering pump in a 1990 Toyota Camry?

how do i replace a power steering pump in a 1990 toyota camry?


How do you replace 92 Toyota Camry power steering pump?

94 toyota camry


How can I replace the power steering pump on an 1993 Toyota Camry wagon with v6 engine?

In replacing the power steering pump on a 1993 Toyota Camry wagon with V6 engine, make sure to replace the steering pressure hose and clamp also. The leaks on both the hose and the clamp are the cause of the broken power steering pump.


What is the Power steering fluid for Toyota Camry?

Power steering fluid is what allow a driver to have full control of a hydraulic steering system. The proper power steering fluid used in a Toyota Camry DOT 3.


Location of the power steering pump for a 1995 Toyota Camry?

You can find the 1995 Toyota Camry power steering pump on the front of the engine. The power steering pump will be on the left-hand side of the engine.


Can power steering fluid be used in a 1996 Camry?

You can use whatever power steering fluid you like.


How do you change the power steering filter on a Toyota Camry?

As far as I know, there is no filter for the power steering unit.


How do you Replace Steering wheel fluid?

Remove the plug on the bottom of the power steering fluid pump. Drain the power steering fluid out. Replace the plug to the bottom of the power steering pump. Replace the power steering fluid.


What would cause the power steering to catch and not steer smoothly on my 1997 Toyota Camry?

If you are lucky tie rod (inner or outer) has to be replaced. If you are not lucky you will have to replace all steering mechanism (steering rack).


How do you replace the belt on power steering pump?

What have to do replace the belts water pump power steering


Power steering is noisy on cold 1997 Toyota Camry what should I check is there a power steering filter?

to my knowledge there is no power steering filter i would check my power steering fluid level


How do you replace the power steering pump on a 1986 Camry 2.0?

complete instructions in vehicle spacific repair manual at most parts stores

People also asked