Replacing rear ball joints on an 1989 Accord First remove rear upper control arm. Remove plastic cap in top of rear suspension knuckle, then remove cotter pin. Loosen castle nut on balljoint stud. Use a puller or separator tool to pop the balljoint stud loose from knuckle, then remove castle nut completely. Remove 2 bolts securing rear upper control arm assembly containing balljoint, to body of car. You now have 2 options for replacing the balljoint. 1. Remove snap ring retaining ball joint in arm then use an arbor press to press out old ball joint and press in new ball joint. The arm must be supported right at the ball joint or distortion of arm will occur. Find/borrow/fabricate suitable pieces of pipe or even large deep reach sockets. 2. Obtain new rear upper control arm assembly containing balljoint. Price them at the dealer (big bucks), auto parts store (about $70-$120) or junkyard. Installation is reverse of removal. Use grease on all fasteners. Don't forget the cotter pin. Drew
the ball joints are not serviceable.
How do you replace your front ball joints on a Lincoln
How do you replace the ball joints on a 1998 Monte Carlo Z34??
Some ball joints are pressed in and others are bolted in, it depends on your style ball joints.
To replace lower front ball joints in a 1996 Jimmy, raise the front of the car. Grease both ball joints and install the spindle. Next, place the spindle over the ball joints.
how to replace lower ball joints on 1995 4 wheel drive Nissan truck
The ball joints are bolt on parts that don't require any special tools to replace.
please answer my question on how to replace ball joints 2007 ford sport track?
how do you replace ball joints on a 2000 envoy
To replace ball joints on a 2004 2WD Ranger, lift the upper control arm of the spindle assembly and remove the nut holding the lower ball joint in place. Then lower the lower control arm to relieve the ball joints. Replace with new.Ê
Replacing Ball joints Check Related Links Below
It will cost approximately $180 to replace the ball joints on your Acura. The cost is dependent upon many different factors.
Replacing a ball joint on a Ford 250 requires removing the wheels, brake assembly, as well as the spindle. From there, the ball joints can be removed and replaced.
You have to replace the whole control arm on front upper ball joints in that particular vehicle.
Rather than replacing just the ball joints, replace the whole arm as replacing just the ball will more than likely not work. Use ball joint remover tools to remove and replace.
You can't repair worn out ball joints. Replace them with new ones.
Need to know what vehicle and what year for an answer
yes i can
Depends on the year.
The squeak is most likely coming from your upper or lower ball joints. Replace your worn ball joint(s) and that'll fix your problem.
The 1998 Dodge Dakota has both upper and lower ball joints. OEM grade replacements are approximately 40-50$ per ball joint (as of August 2014). Labor to replace will depend on how many need replacement and time necessary. The changing of ball joints will require an alignment upon completion additionally. It is advisable to replace ball joints as pairs, when possible.
You can replace just the ball joints on the lower control arms , but the upper ball joints come with a new control arm
There are no upper ball joints - that role is played by the McPherson struts. See "Related Questions" below for more
THE BALL JOINT IS PART OF THE LOWER CONTROL ARM
You have to run the ball joints through the defibulator.