Lift back hatch and look up at the inside of the hatch. Ther should be a rectangular piece in the middle of the door pannel, just pop it off with a small flat head screw driver and it will expose the wiring as well as lights. At least that is how it is on my 05! Cant imagine it could be much different!
how do you replace license pate light on 2006 pontia g6
To replace the brake light on a 2000 Pontiac Montana open the trunk to reveal the housing units. Find the lights and pull the bulbs out. Replace the units.
The clear covers for the license plate light bulbs have small arrows pointing in one direction. Simply push the cover to the direction of the arrows and the covers will slide off allowing for the old light bulbs to be replaced.
pictures of how to change front signal bulbs on a 2004 grand prix pontiac
Remove the screws that hold the covers in place. Replace bulbs!
Remove the two 10 millimeter screws and pull the housing down and replace the bulb
you can see the plugs on the back of the light. lift the trunk and look past the license plate . the twist out . righty tighty lefty lousy . pull them out. its tight but they come out. use needle nose pliars, but be gentle.
The license plate light bulb on a 2002 Pontiac Grand Prix is replaced by removing the retaining bolts and pulling the bulb out of its socket. A new bulb is then put into the socket and reassembled.
no
On some cars the bulbs screw in from the rear and you have to take the light assy off to get to it.
pop the rear door. remove spare tire cover. you'll see large turning knows to unscrew the whole tail light section. the bulbs have wires leading to them. turn and remove the socket. replace bulbs. easy!
how to replace map light bulb in a 2006 pontiac torrent