unscrew take old out, drop new in with gasket put baqck screws IF YOU DONT KNOW HOW TO CHANGE A THERMOSTAT, LEAVE YOUR HOOD CLOSED!
It is located at the lower radiator hose where it connects with the block.
Follow the top radiator hose to the engine, what that mounts to is the thermostat housing, remove this and there is your thermostat. * ** *** **** ***** Actually, on my 1997 SL2, the thermostat is on the bottom radiator hose. I would check the "Saturn Thermostat Pictures" link below, which also has installation and removal instructions.
this site^ will show you a how
The 1997 Saturn knock?æsensor is located on the back of the engine. The knock sensor can be removed by removing the wiring harness and the retaining bolts.
locate the top radiator hose and follow it to the motor, unbolt the housing it is connected to and remove the old thermostat replace it and put it back together
stand at the front of the car and look for the top rad hose and follow it to the end there should be two bolts holding the hosing unbolt and replace the thermostat and gasket
Drain the water from your 1997 GMC Yukon cooling system. Remove the water supply hose. Remove the thermostat housing retaining bolts. Remove the old thermostat and replace with the new thermostat.
The 1997 VW Jetta thermostat is located inside of the thermostat housing. Remove the thermostat housing retaining bolts. Remove the water supply hose. Reverse the process to install the new thermostat.
100
The thermostat is located underneath the radiator hose where it connects to the engine. The thermostat regulates the engine's temperature.
To replace the thermostat on a 1997 Pontiac Grand Am 3.1, first disconnect the negative battery terminal and loosen the clamp on the radiator hose. Next, remove the mounting bolts from the thermostat housing and insert the new thermostat.
Most stats are located in the thermostat housing at the bottom of the upper radiator hose.