I have this car w/ the 2.0. It is a VERY tricky process because it involves taking the face off the motor and setting the timing and tensioners. Unless you are a VERY experienced mechanic, DONT even try it. I took mine to a shop and they didnt know how and bent the valves TWICE. So be careful and wise. The repair book will tell you how... but its a beast.
Plymouth Laser was created in 1990.
Is It a turbo car or not?
You need a timing light
Could be an auto or a manual.
Fuel tank capacity: 15.9 gal.
The 1990 Plymouth EGR valve is located on the outside of the air cleaner housing. The EGR valve can be found on the back side of the housing.
The best place to find the diagram for the fuse box on a 1990 Plymouth Laser would be at the local Chrysler dealer. They carry archived manuals and diagrams going back many years.
take it in
Closest to the passenger side
fuel pressure regulator is on the right end of the rail.
Plymouth does not use inertia/reset switches. The fuel system is computer controlled with relays.
I would think that is logical.
On a 1990 Plymouth Voyager 3.0, the water pump is located behind the timing cover. The timing belt is what drives the water pump.
your best bet would be to pick up a hynes manual for the 90-94 eclipse talon and laser autozone sells them for about 20 bucks
orange is cold, green is colder
Where is the Water Pump located and how do you replace it on a 1990 Chevy Corsica?
How do you replace a waterpump on a 1990 BMW 325i
There is a pipe that goes into the pump. Put the 'O' ring on the pipe and push in
Try a Dodge dealer, Mitsubishi dealer, Ebay, local salvage yard, etc.
It is under the timing cover on a 3.0L
To replace the 1990 VW Jetta water pump you need to have a new one. By using the tools in the tool box, carefully open the old water pump and replace it with a new one.