Water Pumps
Dodge Durango
Mazda 929
Nissan Pathfinder

How do you replace the water pump on a 1992 - 1996 Mazda 929?


Top Answer
User Avatar
Wiki User
2007-02-23 19:25:28
2007-02-23 19:25:28

Hi Its located under the timing belt cover......better plan on replacing the timing bet too

User Avatar

Related Questions

The water pump is located behind the timing belt cover and is driven by the timing belt. You need to reove it to gain access to the water pump.

Mazda 626 frm 1996 doesn't have O2 sensors, have you ECU/PCM inspected, it might have a minor damage.

It is a nonservicable part, just replace it.

How do you replace the water pump and where is it located on a 1996 Buick Skylark V6

Spray oil on it through the door and it will stop.

it is inside of the gas tank,you have to drop gas tank.

How can do I replace a water pump on a 96 camaro z28

where is located the relay of the horn of mazda protégé 1996

Where is the EGR Valve on a 1996 Mazda Protege located at?

was wondering where the inertia switch is on a 1996 Mazda protege

I know a 1996 Mazda 626 has this tire as OEM. I have one. Fourth Generation Honda Preludes also (1992 - 1996)

To change the water pump on a 1996 Mazda 626 you have to follow a few step. First you disconnect the miscombobulater from the alternator valve. Then you take the water pump off and put the new one on. Lastly you re -attach the miscombobulator and the altornator valve. There you have it.

Mazda Demio was created in 1996.

pretty easy, a couple bolts...libraries have shop manuals you can read and copy sections out of...:)

I used this guide when I changed the clutch in my 97. http://www.miata.net/garage/clutch2.html

how to change water pump on 1996 olds ciera and what tools do i nees

Water pump location on a 1996 DevillWater pump is located under the thermostat on the drivers side of the engine

Where exactly it the fuel filter located on my 1996 Mazda protege 1.5 motor.

what size speaker fits Mazda 626 1996 model front door

It's attached to the back of the intake manifold, under the bracket that supports the wiring harness.

AnswerIt is built into your Mass Air flow sensor so you have to replace the whole thing, for the 98 and up they are separate.

I have a 1999 Mazda b-3000 4x4 truck and the speedometer stop working. Are there fuses related to the speedometer that I can replace. If so where are the fuses located in the vehicle.

The spark plug gap for a 1996 Mazda Familia should be set between 1.0 and 1.1 mm. This is stated in the adjustment data from Mazda.

It is located at the engine at the upper rad hose, When you replace it, make sure the spring goes toward the engine.

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.