The car has to be jacked up and the passenger side wheel removed and even one of the motor mounts removed just to START. All this to gain the necessary clearance to begin the complicated procedure. This to be done to replace the water pump and rubber timing belt every 7 yrs or so depending on usage. Necessary but a big pain.
Mazda Millenia hoods from models 1995 to 2002 will fit on a 1995 Mazda Millenia. The Mazda Millenia was first launched in 1995.
how many oxgen sensors on a 1995 millenia
behind the radio
yes heads need to be removed
When that happened to me it was the sensor to the air filter. I had to replace the air filter and sensor.
The audio relay for a 1995 Mazda Millenia Sedan is under the hood of the car on the driver's side. You will see a fuse that is labeled with the word 'audio.'
39-48psi
I am getting ready to replace the EGR valve on my 1995 Mazda millenia. It is located at the back of the engine in the center at the top. It bolts on with 3 bolts. It will be a triangle shape. You will have to have a mirror to see it well. Any auto parts store should be able to show you exactly where it is.
I have a 1995 millenia. I don't the difference but i removed the pattern underneath the glovebox and it was in the lower right corner. It has a plug running into it and it is held by 3 screws. 10 minute job to replace.
No doesn't have one
in the fuel tank. you have to drop the tank to get at it.
What, and go to jail if I get caught ? Yah, right.