see answer for the 1999 Breeze
You replace the rear wheel bearings for a 1997 plymouth breeze by taking it to a very skilled mechanic and just waiting it out. If you want to do it yourself I can't help you with that.
Replace the valve cover and plug tube gaskets.
Pull out the old one...remember how you did such. Put in the new one in reverse order.
tacodometer work off and on97 breeze
It is in the fuel tank.
It is under the plastic covers on the passenger side of the engine, driven by the timing belt.
Take it to the mechanic
Not without heavy modification. The '97s only had the 2.0 liter SOHC engine (same as most Neon's).
how do you replace the camshaft position sensor on a 1997 plymouth voyager 3l
one before the cat and one after
Open the drain plug on the bottom of the radiator.
Should be at the driver's side firewall
pull the black thing off that surrounds the gages then unscrew the screws or bolts then flip it down then you should see the wire pull and replace it
Start by checking the 1997 Plymouth Breeze for proper fuel pressure. Also check for any loose connections at the crank position sensor or the coil packs. Any of these could cause the stalling problem.
You don't. This is one job that should be left to a professional.
No, tank has to be lowered.