You have to remove the caliper and then the rotor and tap on the front of the stud with a hammer so that it slides out from the back.
You have to have the hub pressed out of the knuckle to replace the wheel studs.
You replace the wheel bearing hub assembly - it has studs, bearings and wheel speed sensor around $100 part
you dont
you buy a new cadillac
I belive they are the knock out type take off wheel and drum heat studs on the back hit from front. to replace put new studs in and put back on tires.
Pound your 2002 Suzuki left front wheel studs out. You will need to pound in the new studs in the same manner that you removed the old studs.
To remove wheel studs from a 2000 Honda Civic the wheel needs to be removed. Taking the wheel hub completely off the vehicle makes the process of removing the studs easier. The studs are pressed in and use of a machine press to remove them is recommended.
if the bolts do not get on then you just have to change the studs
pound them out,and replace them with new ones
Unbolt hub and press out wheel studs, clean hub face, replace rotor and press wheel studs back through, remount hub
You need to get the rotor off to replace studs with new ones.
wheel studs? head studs?