answersLogoWhite

0


Best Answer

You've checked all of the obvious causes of a non-running wiper motor -- blown fuse, faulty wiper switch, etc. ...

Also - the wiper motor won't run if it has lost its ground connection - connect a jumper wire to the wiper motor case and a known "good" ground on the vehicle body. If the motor works, clean up the ground connection.

Maybe the linkage is binding? Check that, too. If the motor must be replaced:

1. With the hood up, disconnect the negative battery cable for safety and unplug the wiper motor's electrical connector. Then remove the three motor mount nuts.

2. Hood down. Remove the wiper arms. There's a release lever at the base of each arm that you pry out with a small screwdriver and then lift the arm off its post.

3. Remove the grille that fills the space between the back of the hood and the bottom of the windshield. Raise the hood to do this: the grille is held in place with screws, you may have to move the weatherstripping around to find all the screws. On my '92 Dakota I'd also have to disconnect the hoses to the windshield washer nozzles. When all of the screws are out the grille should lift up and off of the windshield weatherstrip.

4. You need two wrenches for this part: hold the wiper motor's drive crank with one wrench to keep it from turning and use the other wrench to remove the crank nut. Take off the crank and lift the motor out.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you replace windshield wiper motor on 92 dodge Dakota?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you replace a 1999 Dodge Dakota wiper motor?

remove the cowl & wiper arms (mark location of arms on the windshield). disconnect the battery, Disconnect wire connector at wiper motor & remove the 4 mounting bolts then remove the linkage from motor.


How do you replace 1996 dodge Dakota wiper motor?

My windshield wiper just stopped moving, I can hear and feel the motor working but the blades dont move.? How do you get to it, looks like you have to remove the cowl and then maybe you can see if something is un-hooked or broke, anyone have a clue?


Will a 1992 Dakota truck motor fit into a Dodge truck 1999 Dakota?

Will a 1992 Dakota truck motor fit into a dodge truck 1999 Dakota?"


1987 dodge Dakota windshield wiper motor works but windshield wipers don't what could be the problem?

The wiper linkage is bad. Or the wiper arm stud bushings (where the arms attach to the cowl) are rotted out.


Removing the windshield wiper motor on 1992 dodge ram 250 pick-up?

my windshield motor is working great, but the spline that the wiper arm sits on is worn out. do i need to replace the the motor or can i purchase another spline. thank you Ron


Will a 1997 Dodge Dakota transmission fit a 1998 Dodge Dakota?

if its the same size motor it will.


Is a 1993 dodge caravan windshield wiper motor compatible with a 1998 Dodge Grand Caravan?

No.


How do you change windshield wiper motor on 1994 dodge ram?

Remove the windshield wiper arm from the windshield wiper motor. Remove the wiring harness. Remove the retaining nut. Reverse the process to install the new windshield wiper motor.


How do you replace the windshield motor on a 2002 Kia Optima?

To replace the windshield motor on a 2002 Kia Optima, use a fused jumper wire to bypass the relay of the wiper motor. Then use the positive lead to touch the positive terminal on the relay. Remove all mounting bolts of the windshield motor and gently pull the motor out. Replace with new.?æ


How do you remove transmission from 1988 dodge Dakota 4x4 3.9liter motor?

How do I get to the flywheel bolts on a 98 dodge dakota to remove a transmission


What kind of motor oil for 1994 Dodge Dakota?

10w30


Will a dodge Dakota v6 transmission bolt to a 5.9 motor?

No