0
How do you replace your valve stem seals on a 1991 dodge stealth?
Wiki User
∙ 16y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
2001 dodge neon oil in the spark plug tubes?
Under the valve cover there are seals on top of the plug tubes, you will need to replace the valve cover gasket and plug tube seals.
Does the head have to be removed to replace the valve seals?
No the valve seals are between the cam and the head, under the valve spring
Where is the EGR Valve located on a 1992 Dodge Stealth?
Below the throttle body.
1991 dodge stealth oil gage pressure is low all the time?
you may need to replace your gaskets on your valve covers and such, the gaskets are vital to engine pressure
Is it normal to inspect valve seals when doing a valve job?
It is normal to replace them.It is normal to replace them.
Can you replace valve seals on a dodge 360 ram with out removing the heads?
Yes, you remove the rockers, add air pressure in the cylinder through the plug hole and use a valve spring compressor to remove valve spring. You can now change the valve seal.
How do you replace valve stem seals 1989 Jeep?
How do you replace valve stems and guides on a 1989 Jeep 4 Cylinder engine?
Can you use oil treatment for bad valve stem seals?
No, oil treatment will react in the same way as regular oil. Replace the valve seals.
How do you replace the heater control valve on 99 dodge ram?
A 1999 Dodge Ram does not have a water control valve.
How To Replace Valve seal On 2000 metro?
The head, or top part of the motor, must be removed to replace valve seals. After the head is removed take it to a machine shop and they will mill the head to make sure it is flat and also grind down the valves and replace the valve seals.
How do you replace EGR valve or clean it on 1997 Dodge Avenger?
Replace if failed.
How do you replace the bad valve seals on a 2000 Dodge Neon ES oil on one plug?
IF YOU MEAN THE OIL IS DOWN IN THE SPARK PLUG TUBE. THERE IS A SEAL THAT IS IN THE VALVE COVER THAT GOES AROUND THE TOP OF THE SPARK PLUG TUBE, THEY GET HARD AND START TO LEAK INTO THE TUBES AFTER A WHILE. YOU WILL HAVE TO REMOVE THE VALVE COVER TO REPLACE THEM.
