Try disconneting the battery for about 10 mins. or have vehicle scanned to have codes cleared
A person can reset the check engine light by using an OBD scanner to clear the codes. This is after the problem is fixed.
you need a scanner
The light is reset with a scan tool after the repair. There is not a button.
I don't know about the 2000 year model directly but the 1996 is similar I am sure. To reset the "check engine" light, find the EFI fuse (probably under the hood in the fusebox on the driver's side) and with the engine off, remove it for one minute minimum. Replace the fuse and the "check engine" light should be reset.
You can reset it with your OBD reader or you can disconnect the negative battery cable for a couple of minutes to reset the check engine light.
Have the problem that caused the check engine light to come on repaired. They will reset the light with an OBD2 scan tool. The light will just come back on if the problem is not repaired.
Unhook the battery for about 2 minutes and that will reset the computer.
auto zone can rest it for free
With the proper scan tool.
A 2000 Honda Accord check engine light will stay on if the ECU is not reset. To reset the light remove the ECU fuse from the engine bay fuse box. Reinsert it after 5 seconds.
Disconnect battery and leave for about 10 min. Then reconnect. The check engine light went away on mine.
go to auto zone they will run the machine that tells you why the light is on and they can reset it with that
unplug the battery for 30 seconds.
Go to the Camry dealership they should know.
There are pages and pages of things that can cause a check engine light. You need to have it checked with a scantool. Then the code can be diagnosed and repaired.
remove neg. battery cable for 10 min. and reconnect. that should reset the light.
unhook the positive on the battery for 5 min. This should reset your check engine light if it doesnt then you still have issues.
After repairing the cause of the code, you can clear it with a scan tool.
How does one reset service engine light on 2000 Nissan Quest Thanks Bill
after the cause of the code is repaired, you reset with a scan tool, or by unhooking the battery.
If the light is on, it will need checked and diagnosed.
Sorry , there isn't a reset button - you have to have the Explorer scanned to find the trouble code(s) that caused the check engine light to come on . The problem has to be repaired before the check engine light can be turned off by using the OBD II scan tool
disconect pos battery cable for a few minutes
The check engine light problem will have to be repaired in order to have someone with a scanner to reset it. If the repair is not made then the light will come back on immediately.
There are pages and pages and items that can cause a check engine light. You need to have it checked for codes with a scan tool. After repair light can be shut off with scan tool.