with a scan tool or disconnect the battery count to ten then replace cable
Just unplug your battery cables and it resets the OBD computer. A
Chrysler does not have reset switches. You need to check for trouble codes with a scan tool.Chrysler does not have reset switches. You need to check for trouble codes with a scan tool.
You reset the codes with a scan tool after repairing the failure.
You can use a scan tool or unhook the battery.
The ideal way is to read them with a scan tool, fix the problem , and then reset them with the scan tool. Failing that you can unhook the battery and reset the codes until the failure reoccurs.
You have to use a scan tool to clear codes, If the cause of the code isn't fixed the light will return.
There is no reset on a 1996 Chrysler Sebring.There is no reset on a 1996 Chrysler Sebring.
On a Chrysler vehicle the engine computer sets P0700 whenever the transmission computer has detected and set a fault. You will need to have transmission codes checked to know possible causes.On a Chrysler vehicle the engine computer sets P0700 whenever the transmission computer has detected and set a fault. You will need to have transmission codes checked to know possible causes.
It requires a scan tool or code reader.
The light will reset itself when the malfunction detected by the computer is repaired. You need to have the system checked for codes.
P0700 : transmission code present. You will need to have the transmission computer checked for codes to know possible causes.
To reset the abs light you need to check the system for failure codes, repair the cause, and reset with a scan tool.