Disconnect the negative battery cable for 30 minutes.
A check engine light means you have a possible problem with the emission system , you should get the Ranger scanned for trouble codes to diagnose and repair the problem . Once the problem has been repaired the check engine light can be reset.
If the check engine light is on, there's something wrong with the engine. Or, the computer is bad. One or the other. They don't set a light for no reason.
The check engine light has to be reset with a OBD scan tool
You reset the check engine light with a scan tool after repairing the failure.
Should be able to reset it by disconnecting the negative battery cable from the battery for ten minutes.
The check engine light is reset with a scan tool after repairing the cause of the fault.The check engine light is reset with a scan tool after repairing the cause of the fault.
how do i reset the check engine light on a 1999 acura 3.2tl
on most vehicles if you disconnect the battery cables it will reset the check engine light
hoe do you reset the check engine light in a 1995 land rover
Take it to Autozone (or your local parts store) and they will connect the scan tool to your truck, then you will press reset.
The check engine light comes on in a car when there is a problem with the engine. It will go off or be reset when the problem is fixed.