Want this question answered?
The factory alarm is reset by unlocking the doors with a key or remote.
Put the key in the door and then lock and unlock it.
if you have a factory alarm..you will need a power remote to reset the alarm. or you can reset the alarm be using the key in any of the door locks or in the rear hatch lock . just cycle the key to the unlock position to shut alarm off. to reset alarm to armed use the door lock power switch to lock the door then shut door and alarm will reset to on .
Use the key to unlock the driver side door. This will reset the alarm and the starter cutoff. i took the modul that chimes for doors out and mine stop the alarm.
Jeep does not use inertia/reset switches.
There is no reset for the fuel pump on a Jeep.
Unhook your positive battery terminal for 5 minutes. Then use key in passenger side door (after you reconnect battery) turn left/right 2 times this should reset your factory settings.
with the key lock and unlosk the front doors or the lift gate on the rear.
Jeep does not use inertia/ reset switches.
Either reset with a scan tool, or by unhooking the battery.
Where is the fuel reset button on a 2000 jeep Cherokee freedom
You must take it to the dealer. They will plug in the computer and reset the parameters for that function. Chek a couple different dealers. Some will charge to do it, others will not. If they want more business from you, they won't.