answersLogoWhite

0


Best Answer

# Make sure the drivers front(left front) door is closed and you have your car keys. # Insert your door key into the drivers door and turn it to the locked position two times. # Then turn the key to the unlock position twice. # The alarm should be disarmed, now. # SECOND TECHNIQUE: # If not then take the ignition key and turn the ignition switch all the way ON then OFF then ON a second time and OFF again. # These are the procedures for nearly all factory alarm systems. # If neither of these works you probably have an after market(add-on) alarm system. Disarming a after market alarm system with your ignition key will be discussed in a future post.

* This technique is only for use on your own car that you own and have keys for. If you don't have the keys- disconnect the negative battery cable to stop the horn until you get your keys. Then reconnect the negative terminal and proceed to step one.

* Keys

User Avatar

Wiki User

โˆ™ 2008-05-06 00:04:54
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Add your answer:

Earn +20 pts
Q: How do you reset factory alarm?
Write your answer...
Submit
Sign up for more answers

Registered users can ask questions, leave comments, and earn points for submitting new answers.

Already have an account? Log in

Related questions

How do you disarm the alarm on a Chrysler sebring?

The factory alarm is reset by unlocking the doors with a key or the remote.The factory alarm is reset by unlocking the doors with a key or the remote.


How do you reset the factory alarm on a GMC Sierra?

The factory alarm on a GMC Sierra pickup truck can be reset by removing the fuse. Take the fuse out for 10 seconds and replace it. This will reset the alarm.


Where is the Reset button on a 1997 factory alarm Chrysler town and country?

Chrysler does not have reset buttons. The factory alarm is reset by unlocking the doors with a key or remote.


How do you disable a 1999 Chrysler Sebring jxi alarm?

The factory alarm is reset by unlocking the doors with a key or use the remote.The factory alarm is reset by unlocking the doors with a key or use the remote.


How do you reset the Toyota Tundra factory alarm?

In most cases the Toyota tundra factory alarm will reset itself after 10 minutes. You can also pull the fuse out for 10 seconds and replace it to reset the alarm.


How do you reset the alarm on a 2004 Dodge Caravan?

The factory alarm is reset by unlocking the doors with a key or remote.


Where is the hidden alarm reset button on a 1995 cirrus?

The factory alarm does not have a reset button. An aftermarket alarm may have a reset. It could be located wherever the installer put it.


How can you reset the alarm in a dodge ram 1500 2004?

The factory alarm is reset with the remote or by unlocking the door with the key.


How do you reset factory alarm on Hyundai XG 350?

The factory alarm system on a Hyundai can be reset by inserting a key into the on position. Leave the key there until the alarm finishes sounding. Once the alarm shuts off turn the key to the off position and leave it for ten seconds. This procedure will reset the alarm system.


How do you reset the factory car alarm on a 1989 Chrysler New Yorker?

You unlock t h e doors with the key to reset the alarm.


Factory alarm system quit working?

my alarm system keep disable my car how do I reset or disable this alarm system


How do I reset a 1994 Mercedes S factory alarm?

You can reset a 1994 Mercedes S factory alarm by disconnecting and reconnecting the battery. When the battery is reconnected within 20 seconds turn the ignition on.Ê


How do you reset the alarm on a 1998 Acura Integra?

The OEM factory alarm systems have a procedure that is used to reset the alarm. To do so, turn the key to on position and press the lock/unlock button. Do this three times in five seconds and the alarm with be in program mode. Here the alarm can be reset.


How do you disable the alarm on a 2002 Chrysler Concorde?

The factory alarm can not be disabled. It can be reset by unlocking the doors with a key or remote.


How do you reset factory alarm on 2007 Chevy Tahoe?

i does not have a control i need to replaced it


How do you disable the factory alarm on a 1997 Chrysler Town and Country?

The factory alarm is part of the engine and body computers. It can not be disabled. It is reset by unlocking the doors with a key or remote.


How do you disarm the security alarm of a 1998 jeep grand Cherokee?

The factory alarm is reset by unlocking the doors with a key or remote.


How do you reset 2003 Jeep liberty factory alarm?

alarm always goes off until i put keys in ignition


Will disconnecting the negative battery cable reset the alarm for a 1997 Jeep Grand Cherokee?

if you have a factory alarm..you will need a power remote to reset the alarm. or you can reset the alarm be using the key in any of the door locks or in the rear hatch lock . just cycle the key to the unlock position to shut alarm off. to reset alarm to armed use the door lock power switch to lock the door then shut door and alarm will reset to on .


Where is located the button to reset the alarm on a Chrysler Cirrus Lxi 1998?

The factory alarm is reset with the keyless remote or by unlocking the driver side door with the key. If you have an aftermarket alarm, the reset could be anywhere, but is usually under the dash on the driver side.


How do you unhook a factory alarm system on a 1998 Eddie Bauer edition Expedition?

To unhook a factory alarm system look for the alarm brain on the dash and Cut the two red and blue wires. Reconnect the wires and the alarm will be reset it self.


How do you reset a factory installed alarm on a 2006 Chrysler 300?

The system will reset when the proper key is put in the ignition and turned on.


How do you reset a factory installed alarm on 2006 Chrysler 300?

You need to unlock it with the remote.


How do you reset a factory installed alarm on a 2000 Chrysler Grand Voyager?

Use the remote door lock to lock the doors, then unlock, then lock. The alarm should be reset. If not get in the vehicle, lock all the doors with them closed, unlock them, relock them walla alarm reset!


How do you disable the alarm on a 1997 Chrysler Sebring?

The factory alarm can not be disabled. It can only be reset by unlocking the doors with the key or use the remote.