With the ignition switch in the off position, hold in the hold in the trip odometer. Now turn on your key and you will see a series of zeros begin to appear. Once that stops, your maintenance light will be reset.
Set it to trip A and hold reset turn ignition off then turn ignition on and maintenance light will flash and your done.
How to Reset Maintenance Warning Light on a 2008 Toyota 4Runner
A person can reset the maintenance required light on a 2004 Toyota Sienna by holding down the odometer trip button. A series of zeroes will appear, which indicates that the light has been reset.
A maintenance light on a Toyota Camry can be reset by your mechanic after you have the work done that is needed. You also may be able to get instructions by checking your manual.
How do you reset maint read light on 2010 corolla
maintenance with engine
Resetting the maintenance light on a 1999 Toyota Tacoma is very easy to do. To reset the light, take the battery cables off for up to one minute to reset the light.
Set the odometer reading to total miles and not to trip miles. Now press and hold the odometer reset button in and turn the ignition switch to the on position. (Do not start the engine). After around 5 seconds of holding the reset button in the maintenance required light will go off and be reset. Release the button and turn the ignition off.
How do you reset the maintenance required light in the 2011Toyota RAV4 with a smart key starting system
After repairing the cause of the code, you can clear it with a scan tool.
The easiest way to reset the 2001 Toyota check engine light is to remove the check engine light fuse. The fuse can be found in the fuse box.
According to the owners manual for my 2004 Sienna, all it means is that an oil change is due. You can google how to reset the light, in case the guys in the shop forget to.