I have a 1996 Caprice, I assume it's the same method. You turn the key to the "on" position. Fully depress the accelerator three times within 5 seconds. Then turn the key off. When you restart the car, it should be reset.
this did not work
the light is on because there is a problem you can unhook battery for a few mins if the light comes back on after take it to a mechanic and have it scanned for trouble codes
The response "press pedal 3 times" is incorrect, however, this is how to reset the CHANGE OIL light on the Caprice.
CHANGE OIL lights don't exist on the Camaro.
Read what he said below~ O'Riley will look at it too, I'm sure those new AutoZone places will too. But you might want to get it fixed not just unhook the battery. Could be just a misfire.
Just take it to any AutoZone and ask them to read your codes (they hook up a code reader which gives them/you an idea of your problem) and reset you ecu/computer its a free service Could just be your gas cap O2 sensors tune up or a hundred other and worse things.
unplug battery for 20 min
reset service engine light
You can disconnect 1 battery cable for about a minute to reset it but if you don't fix the problem it will be back on shortly.
A reset Engine Service Light comes on when an issue comes up with in the engine. This light can be reset by a tech or by fixing the problem.
reset service engine light on BMW 325
How do I reset the service engine light on a 2003 Chevy Trailblazer?
How does one reset service engine light on 2000 Nissan Quest Thanks Bill
how do I reset my service engine light on my 1999 ford f150
How to reset service light on a 2004 grand am
reset after the engine oil / filter change, service
How Do I reset the Engine service light on a 1996 Inifiniti I30? Please help. thanks
unhook the battery for about ten minutes
The service engine light has to be reset with a scanner. Disconnecting the battery will not work. The light will come back on unless you make the necessary repairs.
The service engine or check engine light can be reset with a scan tool or by unhooking the battery. The light will return if the failure that caused the code is not repaired.
There are a couple of ways to reset the Service Engine Soon light on a Suzuki Grand Vitara. The easiest way is to get a scan tool from your local auto parts store. Using the scan tool will reset the service engine light. Disconnecting your vehicle's battery is another way that often works to reset the Service Engine Soon light.
How do i reset a service engine light on a 2005 gmc c6500 cat engine
The service engine soon is the same as a check engine light. It has nothing to do with an oil change.
The service engine soon, or check engine, light is reset with a scan tool after repairing the cause of the trouble codes.
Either try disconnecting the battery for about 10 mins. or have vehicle scanned to determine the problem and have codes cleared
pull the ECM/PCM fuse for a few seonds then replace it. that should reset it
You need a scan tool to reset light after repairing the code.
I was told by a co-woker that if you disconnect the negative battery cable for about 20 minutes or so that will reset the service engine light.
I reset the check engine light on my jeep by disconnecting it from the battery.
The service engine light on a 1995 Land Rover is reset by connecting an OBDII code reader to the vehicle's computer. It can quickly and easily rest the light.
My experience has been that if you disconnect the battery cables and leave them off for a minute, then reconnect them, the service engine light should have reset.