The answer below is the correct answer...I just used it on my 04 MDX.
Press and hold the select and reset buttons on the right side of the guage cluster. Turn the ignition to run (II), the light will flash once, then stay on steady. Hold the buttons with the ignition in run until the light turns off.
To reset "MAINTENANCE REQUIRED" light, turn ignition off, press and hold the SELECT and RESET buttons. Turn ignition and hold buttons for 10 seconds until the indicator resets. works on 2003 mdx for sure.
By putting air in the tire(s) that need it.
Have vehicle scanned to determine problem and have codes cleared
large
There should be a acura business card in the owners manual that has a reset code
Refer to owners manual or have serviced at dealer.
Means the vehicle needs an oil change or other maintenance. Newer models also show a code like "B16" which will indicate what maintenance is needed. There are instructions in the manual on how to clear the light. However, you should do the maintenance yourself or have it done at a shop as soon as you can.
Acura MDX was created in 2000.
A malfunction.
I have a dash warning light that looks like the letter "i" on my 2008 Acura mdx
what is the code for p.o. 305
This information is located in your driver's manuel under Gauges Page 67. 1. turn off the engine 2. press and hold the select/reset knob in the instrument panel, then turn the ignition switch to ON. 3. Hold the knob for about ten seconds until the indicator resets.