answersLogoWhite

0


Best Answer

On a 2002 Pontiac Grand Am: turn the key to the on position for 30 minutes or until the security light goes out. The car should start.

User Avatar

Wiki User

16y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you reset the alarm so that the vehicle will start after the alarm has been set off?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you reset the alarm on a Volvo S90?

To reset the alarm on a Volvo S90 you will need the key alarm. Press the lock button on the key alarm. Next press the large button the key alarm. The flashes that you see on the LED is confirmation that the alarm has been reset.


Could your alarm system stop your car from starting?

Yes yes and yes. Alarms are usually triggered in the event of an emergency and in this case the car hand probably been bumped or hit in such a way the alarm armed it self. Usually today's cars are designed that so once the alarm system has been armed the vehicle will not allow itself to start. You will need to have it reset so I suggest you call the dealer.


How do you reset your eclipse 54400 after antitheft has been activated?

by reseting the eclipse alarm


How do you locate alarm 2004 Chevy Venture?

the remote has been lost and a new remote has been purchased. i had to remove the fuse to get the alarm to stop. how can i reset the alarm? So i can program the new remote.


How do you reset key less entry for a 2004 Honda civic ex after alarm has been tripped and key will not come out of ignition?

my key got wet now my car will not start. do i have to have my key reprogramed


1998 Volkswagon Beetle Bug Alarm goes off when trying to start?

Disconnect the battery, turn the key to the on position (the position where the engine light comes on). Reconnect the battery and alarm should stay off, then continue to start the car. Been reading all the blogs on how disconnecting the battery and EPC should reset the alarm...doesn't work! But my method worked everytime..."Good Luck"


Why Factory fitted alarm for 2003 corolla wont arm?

The factory fitted alarm on a 2003 Corolla will not arm if the wires have been cut to the alarm. If the vehicle was purchased used, this is a good possibility.


Why does the key for a 1997 BMW 740i set off the alarm when trying to unlock the vehicle?

Why does the key for a 1997 BMW 740i set off the alarm when trying to unlock the vehicle? We unlocked the car with the remote key so that we could get it jump started it. In the process of pushing the button to unlock the vehicle it set off the alarm also. We then tried turning the alarm off with the key but the alarm would not disarm, the doors would still lock and unlock with every press of the button as we desperately tried to disarm the alarm. After a many tries we finally got the alarm to stop. Could you tell us what caused this to happen and what we need to do to keep it from happening again? We still haven't been able to jump start the vehicle because we are afraid that we will set the alarm off again. Please help us. Thank you.


How do you reset the computer on a blazer?

i have been told if y try to start the vehicle anywhere from 1 to 100 times it will reboot itself if you are trying to reset for an inspection you need a computer to plug into your ecm if you un-hook the battery it will only show up at the inspection station


Why does your car alarm keep going off on your 2003 Chevy Malibu after you change the car battery Now you can't even start your car.?

You are suppose to keep a electrial charge to the alarm system by hooking up a battery to the aux outlet in the car. or by known the alarm code that gets entered on the radio after the electrail system has been disconnted. I f you don't known the code You will have to take it to a shop and have it reset


How to Reset 2007 Chevy Avalanche oil life indicator?

2007-2010Turn the ignition to run (one position before starting engine).Display the OIL LIFE REMAINING on the DIC (i) button. If the vehicle does not have DIC buttons, the vehicle must be in P (Park) to access this display.Press and hold the SET/RESET (check mark) button on the DIC, or the trip odometer reset stem if the vehicle does not have DIC buttons for more than 5 seconds. The oil life will change to 100%.Turn the ignition off and then start the engine to verify the indicator has been reset


Turn off Lexus GS 350 oil maintenance reqd display?

1. Turn on the vehicle, but don't start the engine(press the starter button twice with your feet off the brake pedal). 2. Press the ODO button until the screen gives the odometer total (not the trip A or B). 3. Turn off the vehicle. 4. Press and hold the Reset button, while turnning on the vehicle, don't start the engine. 5. After about 7-10 seconds a message to come up showing that it has been reset.