YOU DO NOT NEED TO DISCONNECT YOUR BATTERY!! Turn the key to the on position. Do not crank the motor. After the key is in the on position, quickly push your accelerator pedal down 3 times within 5 seconds. Next start the vehicle. If you have successfully reset the maintenance reminder, it will not appear again until the next service interval.
This light has to be reset by the person doing the oil change. It is not automatic when the oil is changed.
After the oil has been changed, hit your status button. When the oil change comes up hit the reset button.
rest change oil indicator on the dash after you have changed the oil
no you wait till you it changed
HeadlineTry putting your truck in neutral with the engine off. You probably need to turn the key to the on position (dashboard lights on) but don't turn the engine on. Pump the gas pedal 3 times. That should reset the warning light.
The "change oil light" doesn't run off of the quality/quantity of the oil; it runs off of the odometer and the "memory" of the last time the "change oil light" was reset. In other words, if you changed the oil at 3,500 miles and reset the light at that time, the light will automatically come on at 7,000 miles as a reminder to change the oil. You can reset the light yourself in about 5 seconds. The "change oil light" doesn't run off of the quality/quantity of your oil. It runs off of a pre-determined distance from the last time the light was reset - presumably, the last time the oil was changed. For instance, if you change your oil at 3,500 miles, and the light is set to go off every 3,500 miles, then it will again go off at 7,000 miles, regardless of whether you re-changed the oil. Its just a reminder device. You can also reset the light yourself in about 5 seconds.
Reset the change oil light on Mazda 3
how do you reset change the oil light in a 2004 alero?
Turn your ingnition switch on and pump the gas pedal 3 times. Then turn off your ingnition switch wait about 3 seconds then go ahead and start it.
After oil has been changed! Set info to oil life, then hold the reset button (info reset)until it displays 100%. That's it!
It tells you in the manual, but if i remember correctly you turn the key but dont start the truck. then push the gas pedal to the floor 3 times and it will chime if it reset.
First you need to go and change the oil. Then you will be able to hold in the button on your screen to get it changed.
YOU HAVE TO RESET IT SOMETIMES 4-5 TIMES .YOU NEED YOUR MANUEL TO DO IT.
It may have not been reset properly.
Disconet the battery for 15 minutes this will reset your oil change light
== == how do you reset the oil light on a1992 corvette
Your owners manual should tell you how to reset the light.
The Service C light on a Mercedes S550 is just an oil change and inspection. After the oil has been changed, the light should reset itself.
The light is on because there is a problem with the air bag system. Until the problem is fixed the light will continue to illuminate. Once the problem is fixed the light will reset itself.
How to Reset the CHANGE OIL LightThe GM Oil Life System calculates when to changeyour engine oil and filter based on vehicle use. Anytimeyour oil is changed, reset the system so it cancalculate when the next oil change is required. If asituation occurs where you change your oil prior to aCHANGE OIL light being turned on, reset the system.After changing the engine oil, the system must be reset.To reset the CHANGE OIL light use the followingprocedure:Using the Accelerator Pedal1. Turn the ignition to ON, with the engine off.2. Wait until chimes go off,Fully press and release the accelerator pedal slowlythree times within five seconds.The reset is complete when you hear the chimesand the CHANGE OIL light goes out. However, if thelight stays on and no chime is heard, you willneed to repeat the reset procedure.3. Turn the key to OFF.If the CHANGE OIL light comes back on when you startyour vehicle, the engine oil life system has not reset.Repeat the procedure.
how do you reset change oil light on chrysler grand voyager minivan 1997
Have vehicle scanned to have stored codes erased
Change your oil/filter and reset the light.
It may have not been reset properly.
Turn the key to on but don't start it. Push the gas pedal to the floor 3 times in a row and it will say oil life reset