Car Computers and Sensors
Ford Escape Limited
Ford Escape XLT
Ford Explorer XLT

How do you reset the computer after an oil change?

606162

Top Answer
User Avatar
Wiki User
Answered
2005-09-30 18:56:29
2005-09-30 18:56:29

GM vehicle?? Turn key to on (do not start). Push accelerator to floor 3 times. Light will flash to tell you it knows to turn off light.

123
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


To reset the computer on a 2009 Sprinter van after an oil change simply check your user manual.

You will have to locate the Info button to reset your computer on a 2009 Sprinter after an oil change.

You need to locate the info button to reset the computer on a 2009 sprinter after an oil change.

you can't reset it on your own. you have to go to a BMW dealer to reset the oli change in the computer.

oil servis reset without using a computer http://www.kofla.net/chevrolet.htm

The computer in your car just measures how much oil you have, it doesn't need to do anything else.

After doing that little work to it, There is no need to reset the computor. That stuff does not affect the computor.

Renault Service - computer controlled indicator. You may change oil by yourself, but the indicator won't change until it is reset digitally. What does this mean?

Reset the change oil light on Mazda 3

how do you reset computer on a 2003 ford explorer after oil changes

It is usually recommended to reset the computer on a 2009 Sprinter van after about 1000 miles. You can check your user manual on how to go about this.

press the setup button until it switches to life, then press reset, if the oil life is already up press reset first then press setup until it switches to oil life, then reset again

how do you reset change the oil light in a 2004 alero?

How do you reset change oil indecator for caprice 2006?

Need to know what vehicle and year you have. There are different procedures for different vehicles.

try disconnecting the battery that resets your computer

Instructions for resetting the FSS are in the Owner's Manual.

Turn key on without turning on the engine then press the gas pedal 4 times. The computer should then reset.

The oil change light in your car is there to remind you to change your oil in a timely manner. if you do not reset your oil change light, it just wont remind you to change your oil. :)

Hit INFORMATION button until oil percentage is displayed. Press and hold reset until display reads 100%

Turn the key to "on" but do not start the engine. Push the gas pedal to the floor 3 times in quick succesion. The change oil will flash 3 times to let you know it has reset.

The GM Oil Life System calculates when to change your engine oil and filter based on vehicle use. Anytime your oil is changed, reset the system so it can calculate when the next oil change is required. If a situation occurs where you change your oil prior to a CHANGE OIL message being turned on, reset the system. Always reset the engine oil life to 100% after every oil change. It will not reset itself. To reset the CHANGE OIL message, do the following: 1. Press reset stem till it Displays "OIL LIFE" on the DIC.(3 times) 2. Press and hold the reset stem. The oil life will change to 100% and a beep will sound. 3. Turn the key to LOCK. If the CHANGE OIL message comes back on when you start your vehicle, the engine oil life system has not reset. Repeat the procedure. Hope This Helps.

You will need to hold the left odometer reset button. Yes, it is that easy to reset the oil change mileage.


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.