Turn the radio off and hold down the station tuning button for about 10-15 seconds. You should have some options come on on your radio's screen. Scroll through the options by pressing the seek button on the radio until you see (Oil Life) then press the station tuning button again it should say RESET. If it does press it again and it will say DONE.
unhook a battery cable for about 3 minutes and re-hook.
Take it to a mechanic, and have them erase the codes. Auto zone and advance will not do it as they are not mechanics
The easiest way is to simply unbolt the battery cable for a couple of minutes. However, if you haven't fixed the problem that set the check engine light it will simply come back on again.
The light is on because there is a problem with the system. The light will remain on until the problem is fixed. Once the problem is fixed the light will reset itself after a short drive.
turn key halfway without starting the engine, press on the gas pedal slightly. this should work. keep tapping the gas slightly if it doesnt reset . do not press the gas pedal fully, you might flood the engine.
Turn car on but don't start the engin. Pump breaks a couple times. Turn Key to off then start engin all the way. Light should be off.
No.
Either try disconnecting the battery for about 10 mins. or have vehicle scanned to determine the problem On OBD2 disconnecting the battery will do no good as it keeps history codes.jd
To reset the security light on an Oldsmobile vehicle, first the driver must turn the key to the "on" position, without starting the engine. Next, he or she should turn the key to attempt to start the engine, but not completely, so that it doesn't start before moving the key back to the "on" position. After about 12 minutes, the light will?æbe reset, and the key should be removed.?æ
you eat 25 corndogs ! :]
Unhook the car battery.
With the key in the ingnition and either acc or start position (engine not running) pull the fog light switch out and then back in 3 times, you should then hear a beeb to let you know it reset. Might have to do it a couple of times until you hear the beeb.