It's located under the instrument panel to the right of the transmission hump, behind the carpet or vinyl. I had to reset it on my 93 ranger but its still in the same location as a 94 ranger. Hope this helped
push the button down
On a 1994 Ford Ranger : Check in the front passenger footwell , under the front edge of the carpet , mounted on the toe board just to the right of the transmission hump I believe that is where the fuel pump inertia switch is on a 1994 Ford Explorer
The 1994 Ford Ranger pickup truck turn signal switch can be found below the dashboard. The switch will be on the drivers side. The turn signal switch should be labeled as such.
the fuel reset switch is directly behind the glove box, to reset it you just push the button on the top of the switch.
On my 1995 Ford Explorer if the switch has been tripped so that no power is going to the electric fuel pump , the fuel reset light comes on in the gauge cluster in the dash
where is the fuel reset button on a 1994 ford ranger Driver side trunk. behind plastic covering
On a 1994 Ford Ranger : Check in the front passenger foot well , under the front edge of the carpet , mounted on the toe board , just to the right of the transmission hump On a 1994 Ford EXPLORER , I believe that is where the fuel pump shut off switch ( inertia switch ) is
The fuel pump shut off ( inertia switch ) is located in the front passenger footwell behind the kick panel on a 1999 Ford Ranger
Because it had tripped for whatever reason.
There is no such thing as an oil pressure switch on your 1994 Ford Ranger 3.0 liter engine. There is an oil pressure sensor. The oil pressure sensor can be found on the left-hand side of the engine.
On a 1994 Ford Ranger : Check in the front passenger footwell , under the front edge of the carpet , mounted on the toe board just to the right of the transmission hump ( that's where the fuel pump shut off switch / inertia switch was on my 1993 Ford EXPLORER )
1994 ford ranger starts once in awhile
are there struts or shocks on the front of a 1994 ford ranger 2wd
The switch is under the right side of the glovebox , above the carpet ( according to the owners manual for the 2004 Ford Ranger )
I BELIEVE the fuel pump shut off switch / inertia switch is in the front passenger footwell , under the front edge of the carpet , mounted on the toe board , just to the right of the transmission hump on a 1994 Ford Ranger
If you are talking about the emergency fuel shut-off switch (aka inertia switch). just push in the button on top of the switch.
How to replace a clutch interlock switch on a 1997 Ford Ranger XLT
As this should be an OBD1 system, removing the fuse or the positive battery cable for 10 minutes should reset the computer.
The inertia switch may be in the cab, on the passenger side next to the transmission housing. The above answer is correct. The reset switch on the 89 is in the cab, on the passenger side. It is where the floorboard and the underside of the dash meet.
I might be wrong, but I think Mazda made the 1994 Ford Ranger $x4.
What size is the steel brake line tubing on a 1994 Ford Ranger
your owners manual in the glove department will show you
The lug pattern for a 1994 ford ranger is 5x4.5. It is the same pattern that ford and dodge have used for years.
2005 ranger code 32 reset
Look in the kick panels The fuel pump or the "inertia switch" is located behind the glove box in 1994 and earlier models, in 1995 and newer, it is located behind the passenger side kick panel. In the B-series (Mazda?) it is located on the passenger side transmission "hump", under the carpeting. The reset button is located on top of the switch and just needs to be pressed to reset.