A maintenance light on a Toyota Camry can be reset by your mechanic after you have the work done that is needed. You also may be able to get instructions by checking your manual.
how to reset oil timing on 1990 toyota
how do you reset the low tire pressure warning light on a 2009 camry
how do you reset anti theft on a 1994 toyota camry
you will go to the toyota dearler it good pleace
i was checking fuses on 1994 toyota camry and airbag light turned on.
It is reset with a OBD2 scan tool, after the repair of the system.
You have to find the reason why it came on.
lift the bonnet hey presto
It depends. If the sensor is working, just reset the computer. Otherwise you have to change the sensor.
The check engine light is reset with a scan tool after repairing the failure that caused the trouble codes.
use a code reader to check the problem and it will reset the light, but if you do not fix the problem the light will continue to come back on.
Just disconnect the battery for couple minutes.
There is no real reset procedure. The problem needs to be diagnosed and repaired, when it is properly repaired the light will turn off by itself
Toyota does not use inertia/reset switches.
To reset the check engine light in your 2006 Toyota Corolla, you will need to attach the car to a diagnostic computer. This allows you to pinpoint the reason for the light coming on, select the correct sensor, and reset the light.
To turn off the check engine light on a 1999 Toyota Camry you can disconnect the battery. This will only reset the check engine light. So if there is a persistant problem with the engine, the light is likely going to stay on. To turn off the check engine light on a 1999 Toyota Camry you can disconnect the battery. This will only reset the check engine light. So if there is a persistant problem with the engine, the light is likely going to stay on.
disconect the negative battery terminal for about 5 min? that's what i do.
You can reset by resetting ECU but the light will come back. You need to fill tires to proper pressure. If you did, make sure that the spare has proper pressure too. Spare has air pressure sensor, it will set off the light if it is too low.
It is important to take care of the issues that have caused the warning lights to turn on. An airbag light can be reset by clearing the code with an OBD scanner.
you need a obd2 compatible scanner to reset the light.you can not do it any other way sorry hth Dave
When a car is being inspected, it cannot have the airbag light on. The light can be reset by an OBDii scanner, that will clear the code causing the problem or by disconnecting the battery for 30+ minutes.
Disconnect the battery for couple minutes, or stop by AutoZone, they can erase it for you for free.
There is no such button.
The fuel reset button for a 1992 Toyota Camry is in the trunk behind the fabric on the passenger side. On some models of Camrys, the button is on the passenger side under the dash.