It is so easy. Just follow this procedure
Turn the ignition to the ON position -Press the selector button so that the warning is showing -Press and Hold the selector for 10 seconds, the display will flash. Once flashing let go of the button -Press and hold the selector button for 5 seconds, the display will reset.
I just tried the same procedure on my 2007 Honda Accord and it worked.
how do i get a code for my 2007 honda odyssey 2007 if i have the serial for the radio
There is no fuel shutoff on a Honda.
get your brakes fixed....
disconect battery for 15 seconds
There is a 5 digit code in the glove box.
There is nothing to reset except the radio. Insert the 5 digit radio code to reset the radio and then reset the clock and presets for stations.
how to reset a tire sensor for a 2008 Honda civic si
The code A123, in your 2008 Honda Odyssey, is a reference that the air filter may need to be changed. A code should reset after changing the air filter.
You reset it with an OBD2 scan tool after you repair the problem. If you do not repair the problem it will just come back on.
i tried all procedures, and mine still won't go off!
Honda's maintenance minder says to, "refer to Civic Sedan's owner's manual."
You can reset it with your OBD reader or you can disconnect the negative battery cable for a couple of minutes to reset the check engine light.
how do you reset the clock on a 2005 Honda accord how do you reset the clock on a 2005 Honda accord
First have the problem that turned the light on repaired. Then use an OBD2 scan tool to reset the light.
push in and hold the odometer reset button, then turn ignition key until all your dash board lights (enginge, gen, check eng, etc) come on. Wait until oil change light starts flashing, release odometer button. Shut off ignition. done.
How do you reset the tcm on a Honda civic 98
go to your oil percentage then hit and hold reset button
This works for a 2000 Honda Odyssey - it may also work for a 2002...try it.Of course you are free to have the service performed anywhere you like. It is not required that the services be performed at the dealer. As for the Maintenance Required Light, you, or your mechanic, can reset it. Here's how to reset the light:Turn off the engine.Press and hold the select/reset button in the instrument panel, then turn the ignition switch ON (Position II).Hold the button for at least 10 seconds, until the indicator resets.That's all there is to it.
Try disconnecting battery for about 10 mins. or have vehicle scanned to determine problem and have codes cleared
Dealer has to use an electronic tool to reprogram. Unless you can get a hold of one, reference "TPMS".
you either need a good scan tool take it to a shop that's has a scan tool or take the terminals off the battery for 5-10 mins but this might reset something u don't want to be reseted i would suggest a scan tool
Disconnect the battery cable for 60 seconds and it should reset itself.
how to reset computer 1987 honda civic?
If the Odyssey uses the same routine as a Toyota, reset is accomplished by setting the mileage meter to total [as opposed to Trip A, Trip B] and then turning the ignition key to off. Then, holding the mileage reset button down, turning the ignition switch back on...continuing to hold the reset button .... in 5-10 seconds the maintenance 'reminder' light should go out.