set the tuner to the station you want to program for example 99.9 then hold the preset number you want that sation to be set as. this should work if it is a factory radio if you have an after market radio like a sony explode with a remote you set the channel then hold the number on the remote.
Set the clock and radio presets.Set the clock and radio presets.
Tune the radio to the station you want, hold down the button of the preset you want it set to.
No, all you have to do is reprogram your radio presets and set your clock.
AM & FM radios from this period had a simple way of presetting the radio stations. All you need to do is pull the push button out, it will stop about a quarter of an inch out, and then push it back in. That's all there is to it.
Should just set to the desired station and hold button for 3-5 seconds until "blinks"
when you find the station you want to preset push and hold the number you want it to be for a few seconds it should beep and it is set
you turn your radio to the preferred station, then you press the number and hold it so that you can just press the number and it will automatically go to the preset button
how do you set or check the timing on a 99 ford expedition?
Select the desired radio station, then press and hold 'PRESETS' button (about 2 sec) on the appliance. Display icon will flash now. Select desired preset number with up and down buttons on the appliance and then press 'PRESETS' button again to save the change.
If your radio has a "clock" button press and hold it while using the up/down tuner( or volume, i forget) button to set the time.
You only need to reprogram your radio presets, and set your clock. The computer needs no action on your part.
show me the radio in a 2002 Chevy mabliu l s or show me how to set the clock on the radio
Take out the radio set before cleaning out the connectors before reinstalling it.
You should just be able to select the desired station and HOLD the desired button until the station "Blinks" and is "interrupted" for about 1 second
press and hold the "clk" button then while still holding the clk button press the seek button to set the hour and the tune button to set the minute .the radio can be on or off while doing this it doesnt matter ^_^
I do not know your exact model, but most set by tuning to the station you want & then pushing the pre-set button you wish. Hold it in until it goes away briefly & then comes back on. IT IS SET. If that doesn't do it, tune to the station and pull out on the button you want to load that station to. When you push it back in it will be set.
FORD RADIO REMOVALYou should purchase a set of ford radio removal tools .. they slide in on both sides of the radio in the two holes.Once you insert them push in on them about half an inch and you should feel them catch,,then pry out ward slightly on both tools this will release the radio and pull forward .. your done.
On 1999-2004MY, you select the station you want, press SET, then press the cooresponding number.
Hold CLK and for hour seek and minutes tune :)
97 Chevy s10 pickup. Turn the power off on the radio. Press the [set] button, like you would to do your presets. The word set will show on the display. Press the [seek] button to change the hours and the [scan] button to change the minutes. Then press [set] again to save the time.
On the factory radio you tune to the channel you want and press and hold the number you want it programmed on (1-6)
Shock absorbers ( also motorcraft.com lists a dual shock absorber set-up AVAILABLE on the 1999 Ford Ranger 2 wheel drive , if you have that particular set-up there are 4 shock absorbers on the front suspension )
No, if you want to keep the stock radio for an amp use a speaker adapter
It's computer controlled - you don't need to!