This information can be found in the owner's manual. This information can be found in the owner's manual.
If the clock/radio is anything like the one on the '93 Plymouth Voyager, here is how you set the clock: First turn on the radio, then press the set button. When it shows the "P" hit the select button, and it should change to just hours. Turn the Tuner knob to forward or back to set the time you want. Hit the Select button again to go to minutes, and do the same thing with the Tuner knob. Hitting the select button a third time will save the clock settings. ..
It is computer controled and not adjustable.
How to set clock on a 1992 oldsmobile achieva
The airbag computer has detected a malfunction and set a code.
there is 2 very small black buttons right above where the time is displayed. The one on the left is hour and the one on the right is minute. you have to us something with a small tip to change time like a pen head.
you will need a c-clamp and screwdriver and ratchett set.
read the owner's manual
the cam gear mark is set at 6 o' clock and the crank gear mark is set at 12 o'clock.
unhook - side of the battery and let set 5 mins and reconnect and the light will go out.
If it is a three speed transmission, there is an internal failure. If a four speed the computer has detected a malfunction and set a code.
Which engine?? Buy a service manual from your local parts store and line up the marks.
The computer detected a malfunction, set a code, and went into limp mode.
I finally found how by accident by trying various suggestions from later models Thanks anyway Cruban
Press "SET" and then use the keys on the bottom right of the radio.
Press the set buttons for hour and minute.
Turn the ignion on, turn radio off. Press the "Set" button. Use the "seek" and "scan" buttons to set the time.
If you are changing the timing belt you need to get a shop manual on your car from a parts store. It will show you how and have pictures.
There is two small round holes for setting the clock on the right side of the face of the radio past the tuner nob, if you push in with a paper clip or the tip of a pen one is for hours one is for minutes
With the ignition on, press and release the "set" button on the radio. Within 5 seconds, push the "Scan" button to set the hour, push seek to set the minutes.
Press the set button then within 10 seconds push the seek and scan buttons to change the time.
You hold the "rcl" button in and use the "seek/scan button for hours and minutes.
how do you set the clock on a 2001 oldismobile aurora
'how do I set the clock on a 2001 mercury mountaineer'
I just dealt with this myself. Go to www.chrysler.com. There will be a place to click on "recalls". Put in the last 8 digits of your VIN number and it will tell you if this work has been done or not. If not, you can call a Chrysler dealer service department, give them the last 8 of your VIN and they will probably set up a time for you to bring it in and have it fixed at no cost to you.