How do you set the radio on a 94 Geo Tracker?
This information can be found in your owner's manual. If you do
not have one, then I suggest you get one. You need an owner's
manual to know what items to service and when, and for
specifications. You can order one from a dealer, find one at a
salvage yard, ebay, or one of these sites:
http://www.vintage-books.com/owncat.htm Pushbuttons: 1. Tune in the
station. 2. Press and hold one of the pushbuttons for more than two
seconds. The sound will go away for a second and will return when
the station is stored. Setting your secuirty code: 1. Write down
any four-digit number and keep it in a safe place. 2. Turn on the
ignition to the ACC or ON position. 3. Turn the audio system off.
4. Press the 1 and 4 buttons together. Hold them down until ----
shows on the display. 5. Press Seek and/or Tune and 000 will appear
in the display. 6. Press Seek< and hold it until the first digit
of your code appears. Release the button. 7. Press Seek> and
hold it until the second digit of your code appears. Release the
button. 8. Press Tune< and hold it until the third digit of your
code appears. Release the button. 9. Press Tune> and hold it
until the fourth digit of your code appears. Release the button.
10. Press AM-FM after you have checked that the code you intered is
the one you wrote down. "rEP" will appear in the display, which
means you need to repeat steps 5 through 9. 11. Press AM-FM again
and the display will now show SEC.