go to desired station press and hold one of the preset buttons (numbered 1 to 6)
The 2001 Chevrolet Malibu standard radio has a very simple procedure to set the radio stations. Tune the radio to the desired station. Hold the desired preset radio button in for three seconds. The radio station will be assigned to that preset button.
Anytime a battery cable is disconnected you have to reprogram the set radio stations
Chances are, the radio station has a website. Go to the website and there might be a link to a set list.
Use your radio Pre-Set channel to enter code
on the new car on the top
push and hold
to set time turn it off and use select
My code was 1156 or 1165 I don't know if this will help you
Never knew that there was a security code for the radio, just set the stations etc.
On 1999-2004MY, you select the station you want, press SET, then press the cooresponding number.
On the factory radio you tune to the channel you want and press and hold the number you want it programmed on (1-6)
The benefits of WiFi internet radio include the ability to hear radio stations that may be being broadcast from anywhere in the world. Conventional radio relies on radio waves that can be transmitted to a set distance on a set frequency band. WiFi internet radio requires just a stable internet connection.
If you are just trying to set the stations in, go to the station you want programmed. Then press and hold the number you want it preset to.
turn the radio on manually tuner in stations push the set button andnumber for station like 1 2 3 etc.
In most cases Manually tune to the desired station Hold button until display blinks - should be set.
Under the FM button on your radio, it says clock. You hold that button down until the clock on the radio blinks. You then use the numbers 4 and 5 on the CD changer to adjust the hour and minute. This answer is for a type-s.
AM stations have a longer radio wave while FM radio waves are only set for a few cities. While you are traveling from Omaha to Chicago, you will probably be able to hear the FM radio until you get to Council Bluffs. If you are listening to AM, you will most likely be able to hear it most of the way there. This is because of the radio waves.
read your owners manual if you have one, too many different types of radios anymore.
Another contributor indicated, to look under the ashtray for a set of numbers.
You use the preset station buttons on your radio in the code order, if you have entered it correctly after the last number entered it will set to on mode in approx 5 secs then you set your prefered stations as per normal.
Guglielmo MarconiWhen Marconi built his first radio it was set to a specific frequency to match the receiver/transmitter that he was going to communicate with...variable tuning came later. The transmission was not voice, but "Click" code.The advent of commercial radio "Stations" and broad use brought about the need for variable tuning.So the FIRST radio would have had one hard frequency setting at a time.
I Don't Know Mabby BUY A NEW CAR!!!!!!!!!!!! I CAN BELIEVE ALL THE IDEOTS IN THE WORLD!!!!!!!!!!!!!!!
Find station, then push one of the numbered buttons for 15 seconds, or until you hear a beep. Set all your favorites on buttons 1-6. If your radio is equiped with FM1 and FM2, you can program 12 stations instead of 6.
Just get to the station you want to set, then PRESS AND HOLD the button for about two seconds. I think it gives a quick beep when it's set, but not positive. It's that easy.
89&93 Aerostar ownerOn my 93 Aerostar, I find the station I want manually then to set that station to # 1 for example, I hold the #1 button for several seconds (The volume will cut off briefly and when it comes back on you release the number button that you were holding in) and that sets it. Continue to set your other stations to what numbers you want the same way.