answersLogoWhite
EGR Systems
Chevy Silverado
Ford Crown Victoria

How do you set timing on a 1985 Ford Crown Victoria LTD with throttle body injection on a 5.0?

567

Top Answer
User Avatar
Wiki User
2008-04-03 22:35:04
2008-04-03 22:35:04

There is a TDC mark on the harmonic balancer mark it with a piese of chalk then set this mark to the coresponding gauge (in front of crank position sensor). Hook up a timing light and point it at the harmonic balancer then start engine and turn the distributor until the light falshes at 6 degrees BDC.

1

Related Questions

User Avatar

The 4.6 litre V8 engine in a 2005 Ford Crown Victoria has ( 1 timing CHAIN to each cylinder head , so there are 2 timing CHAINS )

User Avatar

Just slightly confused with the question. This 4.6 L has port injection. The intake is on top of the engine, which regulates just the air flow.

User Avatar

Installation throttle positionsensor

User Avatar

no,they don't fit. They have a different throttle body fitting.

User Avatar

You don't. The Idle is controlled by the ECM. There are no idle adjustments

User Avatar

Probably computer controlled and not adjustable

User Avatar

timing chain --------------------------------------------------------------------- The Ford 4.6 liter V8 engine has ( 1 ) timing chain to each cylinder head , so there are ( 2 ) timing CHAINS

User Avatar

the dpfe is on the passanger side of motor just behind the throttle body

User Avatar

On a 1997 Ford Crown Victoria : The 4.6 liter Single Over Head Cam engine has ( 2 ) timing CHAINS ( 1 ) timing CHAIN to each cylinder head

User Avatar

Ford Crown Victoria was created in 1955.

User Avatar

10 degrees is the base timing. chalk can be used to better see the markings. make sure the vehcile is warmked up,pull the spout out and hook up the timing light

User Avatar

On our 99 CC it to the right of the throttle body with 2 bolts holding it on. It should b on the same place on yours.

User Avatar

looking for 1995 crown victoria fuses location

User Avatar

Ford LTD Crown Victoria was created in 1983.

User Avatar

As far as I know both the 5.0 and 5.8 liter V8 engines in a ( 1985 ) LTD Crown Victoria have a carburetor ( starting with the 1986 model , the 5.0 liter V8 engine was fuel injected , but the 5.8 still used a carburetor )

User Avatar

crown Victoria blower not working and head lights.

User Avatar

A Ford Crown Victoria is ( less than 2 tons )

User Avatar

Yes, Fenders on the crown Victoria are interchangeable between the years of 1992 to 2011, they are EXACTLY the same. Grand marquis fenders are the same as well and are completely interchangeable with the crown Victoria within the same year range.

User Avatar

where is the DPFE sensor located on a 2002 ford crown victoria?

User Avatar

where are the spark plugs of a 2000 crown Victoria


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.