How do you siphon gas out of a Plymouth sundance when you need to replace fuel pump in the tank?
If there isn't much gas left in the tank (like, a quarter of a tank) then you can jack the front of the car up in the air before you undo the bolts. With the gas tipped back, you might be able to change the pump out without spilling anything. Keep a bucket handy though!
everyone should have a manual for their vehicle, and the library should have a professional shop manual available in the reference section for FREE to make copies of...read up and fix like a pro!! :) Dave The fuel pump relay for a 1993 Plymouth Sundance is located on a post just above and behind the battery. There are two slightly different relays on the same post. We believe that both supply info to the fuel…
Disconnect the fuel filler tube and siphon the gas out of the fuel tank. Remove the electrical connector and fuel lines at the fuel pump after relieving the pressure (If you have any). Beat the round retaining ring around until it spins out and pull out the fuel pump. There is a round gasket underneath that should be replaced.
I just purchased a 1994 Plymouth sundance from my niegbor for dirt cheap (joe dirt) it has been sitting for about three years.just wanted to see if I could fire it up. put a new batt. in it . it cranks over but no fire I primed it with gas it fires and runs until gas burns out .I am thinking maybe a fuel pump from sitting so long! what do you think?