answersLogoWhite

0


Best Answer

There are two main ways that I know of: the by layers way and the recursive way. To get the actual algorithms for the by layers way go to: http://www.ws.binghamton.edu/fridrich/Mike/middle.html", although I would recommend actually trying to solve it yourself for a month first so you don't spoil it for yourself. The one main thing newcomers get stuck on is the logic: solve one side, solve another side, solve another side...sigh; this does not work. Watch this video part1 and 2 and you should learn : http://www.YouTube.com/watch?v=HsQIoPyfQzM

User Avatar

Wiki User

15y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

14y ago

first on 1 face make a cross. Then fill in the corners. next move pieces from the top layer to the 2nd. now make a cross on the top face aline it move the corners in position then flip them. now you should have solved it.

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

There are many answers to your question that need to be referenced and then researched, rather than fully explained here. Basically you use various sequences of moves called algorithms to shift each piece to a desired location in a methodical manner. Generally, people begin their cube-solving journey with the Beginner's method, then progress to the 2-look method and then more advanced techniques like the Fridrich method (F2L, OLL and PLL).

While there are other, less common approaches, the ones I have mentioned above all have the following in common:

1. Begin by making a cross on the bottom or top of the cube (most often white).

2. Fill in the corner cubies of this bottom/top layer so that each piece is in its correct position, meaning you have just completed the first layer.

3. Insert the centre edges so as to have fully solved the First Two Layers (F2L).

4. Form a cross on the top layer of the cube (usually yellow).

5. Orient the Last Layer (OLL) so that it is completely one colour, not worrying about what position the cubies are in.

6. Permute the Last Layer (PLL) so that the top layer is now completely shifted around so that each cubie is in the correct place, thus solving the cube!

Advanced techniques use more intuitive moves and shift multiple pieces in one algorithm like moving 3 pieces in a clockwise manner, or swapping 2 sets of opposite pieces.

I hope this helped a little. I would recommend starting with "You can solve the cube," which is available for free from Rubik's Academy section of Rubik's official site. Good luck!

This answer is:
User Avatar

User Avatar

Wiki User

11y ago

Oh Gosh, now you're asking one heck of a question!!

There IS a technique for doing it, but it's much too long and complex to be described via WikiAnswers, and besides, it requires diagrams.

You're best bet is to look out for a book on how to solve the Rubik's Cube- if you can't get one on Amazon, you ought to be able to download the information from the internet, or at least pick up a book from your nearest bookshop.

This answer is:
User Avatar

User Avatar

Wiki User

10y ago

Solving a Rubik's Cube is usually done layer by layer. Trying to do it face by face would be nigh impossible, as you couldn't do the other faces without screwing up the ones you may have already done.

I will cover three ways of solving the Rubik's Cube: beginner, intermediate and advanced, and I advise you to start with the beginner method. The intermediate method is similar to the beginner, except the last layer is slightly different, allowing for faster times. The advanced method is what is known as the Fridrich method and, with practice, will allow you to achieve times of less than 20 seconds. I myself use a mixture of the intermediate and advanced methods, as I have not yet learnt all of the Fridrich method.

I will try to explain everything in a way where you can understand, as when I first learnt I had to figure stuff out because the tutorial wasn't that good.

Before we begin, I recommend you go to the notation page and familiarise yourself with it. I shall refer to it throughout this guide, but worry not! It's really rather simple.

Step 1 - The CrossThe first thing to know about the cube is that the middle pieces don't move. Go ahead, try and move them. They rotate, but they never move in relation to each other, which means that each face will always be that face. Also, a common mistake when people first approach an unsolved cube is to think they have to solve 54 stickers. This is wrong, as there are only 20 pieces that actually move around - 8 corner pieces and 12 edge pieces.

Throughout this website, it will be assumed that the first face is the white face. Every single time you do the cube, you should start with the white face so you get used to always looking out for the same colours at different stages. If I were to pick up a cube and start with, say, the green face, I would get hideously confused when it came to the last layer because I am so used to looking for yellow pieces instead of blue ones.

The first thing you have to do is to create a cross on the first layer, like so:

Grey cubies show cubies that aren't important at this stage - just ignore them.

There aren't many algorithms to achieve this as it relies mostly on logic, but there are some scenarios you can watch out for:

RF RF R U

It is also important to remember that the edge colours have to be aligned with the centers like this:

and not like this:

Step 2 - The CornersThe next step is to put the corners in, like this:

Just like the edge pieces before, it is important that the corner pieces match with the pieces around it, i.e. not like this:

The corners will most likely be on the bottom layer. It is important to first put the cubie you wish to move underneath where it needs to go. That is, the white-blue-red cubie should be underneath the white-blue-red corner. There is an algorithm for each situation:

F D F'R' D' RR' D R F D2 F'

(The white sticker on the corner is on the bottom.)

In some cases, the corner will be on the top layer but just needs reorienting or repositioning, for example: R' D R F D F'

The last three moves are from before - the cubie just had to put in the proper place first.

If a corner cubie is in the top layer but in the wrong place, it also needs to be taken down to the bottom layer. This can be done with either of the following algorithms:

F D' F' or R' D R

Once the cubie as on the bottom layer, it can be put it in the correct place by using the above algorithms. When you can, always try to use one of the first two instead of the third as they are shorter and will save you time.

Step 3 - The Second LayerThe next step is to put the four second layer pieces in the right place, like this:

The first thing to do is to turn the cube upside-down, so you have this:

Then find the piece that you need to put in the correct place - in this case the blue and red edge piece. You need to get to one of two situations:

or

To put the piece in the correct place, you need one of two algorithms, and one is the inverse of the other. These are the longest algorithms you'll need to learn.

U R U' R' U' F' U FU' L' U L U F U' F'

Sometimes, the second layer is sneaky and will throw this sort of situation at you:

Here, none of the second layer pieces are in the right places but you can't get to one of the above situations. To fix this, just do the algorithm anyway. In the above picture, using the first algorithm on the yellow-red edge piece will displace the orange-green piece, like so:

Now that the orange-green piece is in the top layer, you can solve it like normal.

Sometimes, you may meet this situation:

You can solve this in the same way as before, by using the normal algorithm on a yellow edge piece and displacing the red-blue piece so it can be solved as normal. Or, if you're feeling clever, you can show it who's boss and give it a bit of the old R U' R' U F' U2 F U F' U2 F.

There will be times where there is a piece where another piece needs to go, like this:

Don't be tempted to remove this piece in order to put it in the right place, as that takes time. Instead, put the red and blue piece there like normal and this will displace the foreign piece. This way, the algorithm only needs to be done once and not twice. The foreign piece can then be put in its correct place like normal.

Step 4 - The Last Layer CrossAs the name suggests, this stage comprises of creating a cross on the last layer, like this:

This can't be done in the same way as the first cross, so there are two small algorithms to learn.

Before you begin, you will be in one of four situations:

L, for example:Line, for example:Dot, for example:Cross, for example:

Each situation is treated slightly differently, and for your convenience I have provided a table to show which algorithm to use at each situation. Obviously, if you already have a cross, move on to the next step! F U R U' R' F'Make sure you hold the L in the top left corner (like in the picture)F R U R' U' F'Make sure you hold the line horizontallyUse both, in either order.

Using the L algorithm gets you to a line, so you can then use the line algorithm, and vice versa

Step 5 - The Last Layer EdgesThis step will change the orientation of the edges of the cross you just created to line up with the centers, like such:

There is one algorithm to achieve this:

R U R' U R U2 R' U

It is quite easy to remember, as it only uses the right and up face, and the up face only moves clockwise. However, the cube must be held in a specific way before the algorithm is applied. Firstly, twist the top face until two of the edges are correct. There will always be two that are correct, whether they be adjacent or opposite each other.

If they are adjacent, hold one correct one away from you and one in your right hand, like this:

If they are opposite each other, hold one correct one away from you and the other towards you, like this:

If they are opposite each other, applying the algorithm will change it so they are adjacent to each other. You then apply the algorithm again (holding it correctly) and they will all be correct.

Step 6a - The Last Layer Corners AThis step alters the corners so they are all in the right place, but not necessarily in the right orientation, like this:

This is just an example - your corners may be in a different orientation once you've done this.

First thing to do is to examine your cube and see if there are any corners that are already in the right place, e.g. the red, blue and yellow one in the picture above. It's in the right place, just not the right way around. If there are, make sure you hold it in the bottom right corner of the top face when you apply the algorithm - but don't move the top layer, move the whole cube to put it there. If there aren't any correct, you can apply the algorithm when the cube is held in any way (yellow face on top of course).

The algorithm is this:

U R U' L' U R' U' L

Some people (including myself) prefer to think of this as the top face, the right side away, the top face back again, the left side away, top side back again, right side towards, top side back again, left side towards. After the algorithm, the corner cubies (except the one in the bottom right - your possibly correct one) will have changed around. If they still aren't all correct, keep applying the algorithm until it is. If you started with one correct, you'll only have to do this algorithm twice. If you didn't, it may take more.

Step 6b - The Last Layer Corners BThis is the last step, so will result in the completed cube:

I advise that you read through this section completely before attempting it. If you mess it up, you'll ruin everything, become sad and frustrated, and have to start all over again.

There is only one algorithm for this section:

R' D' R D (Reminder - it is important that the turns are done as if you were looking directly at the face! Don't let the Ds catch you out!)

This algorithm gets applied multiple times to each incorrectly oriented cubie (that is, every corner cubie that does not have yellow on the top). If you don't have any, congratulations! You've solved the Rubik's Cube. But if you do, read on.

You must hold any incorrect cubie in the bottom right of the up face (the Red-Blue-Yellow corner in the below picture, as Blue is the front). Then apply the algorithm repeatedly until the yellow side of that cubie is pointing upwards. This will be either two or four times:

Do the algorithm twice.Do the algorithm four times.

Once the two or four algorithms are completed, twist only the top face until another incorrectly oriented cubie is in the bottom right of the top face and do the algorithms again on that incorrect cubie.

Whilst you are doing these algorithms, the bottom two layers of the cube may become a jumbled mess. Worry not! They are sensible, and will resolve themselves once you have finished the algorithms on the last incorrect cubie.

Once these algorithms are complete, you are only one or two turns away from completing the Rubik's Cube.

Congratulations!

This answer is:
User Avatar

User Avatar

Wiki User

14y ago

Try Harder

No realy, It depends on what position the cube is in at the moment

I feel that Rubik's cubes are a little pointless and kind of boring.

This answer is:
User Avatar

User Avatar

Wiki User

13y ago

use your brain

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you solve your 3x3 Rubik cube?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

What is God's number for the 3x3 Rubik's cube?

Any 3x3 Rubik's cube can be solved in 20 or less moves, so God's number is 20.


What kind of intelligence solves a Rubik's cube?

There is an amazing website that I have found that is wonderfully concise with it's complete animated illustrations of moves that can be used to solve the Rubik's cube. Click on the related link.


How many coloured cubes on 3x3 Rubik's Cube?

28


Who has the world record for the Rubik's cube?

Erik Akkersdijk holds the record for the 3x3 Rubik's cube, solving it in 7.08 seconds. Kowalski


Where did erno rubik made the rubik cube?

erno Rubik invented the 2x2 - pocket cube 3x3 - Rubik's cube or magic cube 4x4 - Rubik's revenge 5x5 - professor's cube Rubik twist-snake Rubik's magic-the foldable sheet puzzle


How do you solve a Rubik's cube 4x4?

I used this series of video's on YouTube.com: http://www.youtube.com/watch?v=v4hXzxcRtTY&feature=channel but if you don't like to learn it from a video, use this website: http://www.speedcubing.com/chris/4-solution.html I highly recommand to first learn how to solve a 3x3 Rubik's Cube, because at some point of the 4x4 you have to solve it the way like a 3x3, and that part is not in the video or at the website.


Why doesn't the 3x3 rubik's cube solver on wrongway.org work?

It does work.


Is the smallest Rubik's Cube the easiest to solve?

The smallest Rubik cube is the 2x2x2 cube and it is by far the easiest


What is the brain teaser level of the 3x3 rubiks cube?

From my personal experience, the amount the 3x3 Rubik's cube "teased my brain" would be at about a 5/10.


Can a dog solve the rubik's cube?

no!


I can solve the Rubik's Cube 2x2 and 3x3Will knowing this help me to learn the 4x4 or 5x5 Thanks?

This skills that someone has to solve a Rubik's cube can be used on any size Rubik's cube, whether it be a 2x2 or a 5x5.


How do you solve a 3x3 Rubik's Cube for the first time by yourself?

If I am understanding your question correctly then you take the cube and you turn the left side of the cube away from you , take the top and turn it to your left keep repeating these steps until the cube is solved!:D