To stop spark knock , try a higher octane fuel. Make sure that the engine is timed properly and that the spark plug type isn't considered too "hot."
The knock sensor sends a voltage pulse to the computer whenever it detects the vibrations caused by metal, such as the conditions caused by the spark knock. When the knock sensor sends a voltage pulse, the computer retards the timingin an effort to stop the spark knock.
The knock sensor detects spark knock (ping) and sends that info to the ECM. The ECM makes timing adjustments to stop the ping.
If it is making a noise like a spark knock, maybe it is a spark knock.
No. The knock sensor's purpose is to detect spark knock (pinging) and send a signal to the ECM to temporally retard the timing until the spark knock stops.
The knock sensor detects spark knock or ping.
Worn spark plugs would cause mis-firing or non firing cylinders, both are no good for the engine, replacing the plugs may stop the knock (Could also be a different problem) But you should replace spark plugs as soon as possible.
yes when it is not working properly
Spark plug knock on a 1998 Chevrolet pickup is an indicator that the ignition timing is correct. By adjusting the timing, the knock can be eliminated.
Severe spark knock (pinging) can damage the engine. Knock sensors detect spark knock (pinging) in the engine. They send that info to the ECM (Engine Control Module). The ECM makes temporary adjustments in engine timing to eliminate the spark knock.
knocking as in spark knock? or engine knock? spark knock is adjusted through a knock sensor via ignition timing. eng. knock is due to brg. knock as in low oil pressure or sluge in engine or just a tired motor
They help control spark knock and the damage they can do.
The knock sensor detects spark knock (aka ping), sends that signal to the engine control module (ECM), the ECM retards the timing until the spark knock stops.