you have to remove the 2 screws out of the arm rest. then the 2 screws under that. don`t forget the window handle which is held on by a clip. from there the panel is actually in 2 pieces and is just snapped in to the actual door
Take off all the screws on the door panel.
You don't without breaking the door panel.
how do you take apart a door panel on an 07 ford fusion
How to take the door panel off a 2002 mercury mountaineer?
take the panel off the door, everything is inside
how do you take the door panel off on the driver side
Take the whole door panel off. The grill will come with the door panel.
Unscrew the door lock.Remove the door pull.Take out any remaining screws on the door panel.Remove the master power switch.Pull the panel from the door.
take arm rest off, take inside door handle and window handles off and then take screws out around the bottom of the panel and get something that will fit between the door and panel and pop the clips out all the way around and the panel comes off.
It's at the Passenger's end of the instrument panel. Open your passenger door and take off the end panel. It's at the Passenger's end of the instrument panel. Open your passenger door and take off the end panel.
to be able to take off the door panel you have to take out the screw for the interior door handle. then take off the black panel by the mirror on the inside.next you must find the plastic screws that hold in the door panel with a Phillips head screwdriver. after that you must take off the switch, generally for me i can pop it out with a flat head, then take off the wire to it. after all of that it should pop loose to get around the lock you have to pull the door panel over it and it should come off clean.
firs look for all screws of the door if they are show it, them some times there's more screws hid inside of the plastics so check for edges on the door panel after that take a screw driver and push in to the edge of the door panel and the metal of the door.
The interior door panel is held on with 10 retaining clips and two screws. Remove the screws near the door handle. Pry outward on each retaining clip. The door panel will come off.
Removing a door panel from a 1995 Ford Contour is very easy to do. You will need to take the speaker casing off by taking out the two screws. Then you will need to take the clips off that are holding the door panel in place. There will also be two retaining screws to be taken off the door panel with a Phillips screwdriver. After all the screws and clips are off, the door panel can be lifted off.
Using a screw driver, remove the screws and remove the clips from the door panel. Remove the panel slowly, remove any wire connections, and pull the panel off the door frame.
An instructional video on how to take a door panel off a 1999 Sonoma can be view on YouTube. Search for "How to remove door/door panels 1999 Sonoma/s10" and click on the first search result.
take door panel off you will see speaker on door take it out cut wires split wires wire the to new speaker + - put door panel back on that's how i did my jeep
To remove the door panel on a 1994 VW Jetta, first remove the lenses of any lights that are in the door panel. If there are electric locks, the armrest will have to be removed by loosening the screw on the bottom. Then the door panel can be removed by loosening the 8 clips holding it to the door frame.
It has a retainer on the inside of the door. Take the door panel off.
The 1996 Ford Contour door panel is held in place with 10 retaining clips. Pry outward on each retaining clip to remove the door panel.
there should be a screw where the door handle is and maybe on the corners of the door panel. undo any screws and take off any handles then pop off the panel with a flathead screwdriver.
place a flat head screwdriver on the bottom of the door panel out to the edge and slip it up into the panel. then pull out, causing the panel to come out,place your fingers under the panel and slowly pull out. the snapps will start to let go and you have to work around the panel till it is loose. take the door handel (inside) and open it up this allows the panel to slip out. pull up on the panel to unattach it from the door. the window controls need to be pushed up and out of the panel, once this is done the panel shoud come loose.
Remove the screws under the door handle on the door panel, and take off the trim plate. Then remove the door lock knob by untwisting it. Pull the door panel with a putty knife or door panel puller, removing any screws and disconnecting the wiring. Take speaker out by removing screws that should now be visible.
A flush door has panels that are mostly flat and take up the entire space of the door. A panel door has loose fitting panels that fit into grooves that make up the frame of the door.