Ford Expedition Eddie Bauer
Ford Expedition XLT
Ford Explorer XLT

How do you take off the door panel at driver side to replace mirror on a 2000 Ford expedition XLT?

414243

Top Answer
User Avatar
Wiki User
2008-01-05 03:05:46
2008-01-05 03:05:46

pull the door off, they have clips you gotta pry..good luck..make sure you get every little screw off first and pop your power widow/lock control off the panel

1
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions

User Avatar

Remove the front door sail panel. There you will see 3 bolts holding the side view mirror. Remove bolts, replace / or fix side view mirror. Installation is the reverse of removal.

User Avatar

Go to this website. It will show how to remove the door panel and the side mirror.

User Avatar

Remove the front door sail panel. There you will see 3 bolts holding the side view mirror. Remove bolts, replace / or fix side view mirror. remove the wire hardness. Installation is the reverse of removal.

User Avatar

if you take off the door panel there will be three studs that connect the mirror to the door

User Avatar

Go to the following website. It will show how to remove the door panel and the side mirror. kwmuth.com

User Avatar

right in the front corner of the door on the inside should be a black panel pop off that panel and the nuts that hold the mirror on will be right there

User Avatar

To install the Mitsubishi Eclipse driver mirror, you will need to remove the interior door panel on the driver's side. Then, remove the cover for the mirror screws. Remove the screws and wiring and remove the old mirror. Replace the wiring and screws as you add the new mirror to the car. Then place the cover and the door panel back on the vehicle.

User Avatar

Remove the inside door panel from your 1991 Chevrolet 1500 pickup truck. Remove the wiring harness from the mirror. Remove the driver side mirror retaining bolts. Reverse the process to install the new driver side mirror.

User Avatar

To replace a mirror in a Toyota vehicle, first, the negative cable of the battery should be disconnected. Then, the mirror cover should be removed from the door panel carefully, and the wiring disconnected so the mirror can be replaced.

User Avatar

i replaced my driver side mirror, remove the black plastic panel opposite the mirror, i used a paint can opener, there are hidden panel clips, three nuts and disconnected the electric mirror control

User Avatar

To replace the driver side mirror on a 2003 Ford Focus you will need a socket and a Philips head screwdriver. Loosen the driver side door panel so that you can reach inside to unplug the wiring harness, and then remove the bolt and screw to remove the mirror. Put the new mirror in place and reattach everything you just removed.

User Avatar

Begin by removing the inside door panel. Remove the drivers side mirror wiring harness. Remove the mirror retaining bolts. Reverse the process to install your new mirror.

User Avatar

Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. (Replace mirror) 4. The installation is the reverse of the removal.

User Avatar

To replace the driver's side mirror on the 2003 GMC Envoy, first remove the interior door panel. Then, remove the mirror connection cover inside the panel as well. Unscrew the screws holding the mirror to the door. Remove the wiring and replace the mirror with a new mirror. Replace the screws and place the door panel back onto the door.

User Avatar

Door Panels Removal & Installation 1. Remove the sail panel. 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. (Replace Driver's Side Mirror) 4. The installation is the reverse of the removal.

User Avatar

pull off door panel to get to the 3 10 millimeter nuts to take the mirror off and if the mirror is electric you have to unplug the wiring at the connector in the door.

User Avatar

Go to this website. It will show how to remove the door panel and the side mirror.

User Avatar

Remove the front door sail panel. There you will see 3 bolts holding the side view mirror. Remove bolts, replace / or fix side view mirror. remove the wire hardness. Installation is the reverse of removal.

User Avatar

you have to take off the inside door panel should be three screws to take off replace mirror tighten screws put panel back on

User Avatar

Take off the door panel and unbolt the mirror housing

User Avatar

remove the plastic panel and there are 3 ten mm nuts remove and replace mirror.

User Avatar

Remove the front door sail panel. There you will see 3 bolts holding the side view mirror. Remove bolts, replace / or fix side view mirror. remove the wire hardness. Installation is the reverse of removal.

User Avatar

how i do replace the drivers side mirror for a 2002 Chevy venture with taking off the inner door panel


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.