answersLogoWhite
Ask
Chevy S-10

How do you take the passenger side paneling off of a 95 Chevy S-10 Blazer?

414243
Answer

Top Answer
User Avatar
Wiki User
2006-12-23 08:35:51
2006-12-23 08:35:51

1)First you have to remove a small oval cover in the door handle. It will pry open easily with a flat head screwdriver. Remove the two screws here and set aside. 2)Inside the small indentation where your door handle is there is another plastic screw, remove this and the cover. 3) Next comes the tricky part, you will need to "pop" off the paneling from the door frame. I snapped two while doing mine, so take your time and don't be surprised when they do. 4)After you've popped the panel off you will have to lift up on the panelling to clear the edge of the window. BE CAREFUL, if you have power mirrors and locks, these cords are still connected to your panel. Once your panel is free from the window edge disconnect(don't cut) wires at connectors.

1
0

Related Questions

User Avatar

Bottom of the motor, passenger side.

User Avatar

Passenger side bottom of engine.

User Avatar

Behind the passenger side of the dash.

User Avatar

Under the hood, passenger side, firewall, close to passenger fender.

User Avatar

Passenger side, in front of the starter.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.