Take out the double pole breaker, place the white wire on the grounding bar along with the ground wire, install singe pole breaker(size needed) attach black wire onto new breaker and you now have 110 line.
There is an existing plug behind the left side tail light (look up from under the bumper). Get the proper tee-connector and plug it in.
Spark plug wire not connected to spark plug? Spark plug wire connected to Wrong spark plug? Vacuum line disconnected? Bad spark plug or wire?
You can't but you can install a plug on the end of a cord. Just go purchase one and install it. Very simple to do. Black wire goes to copper screw, white wire goes to silver screw, and ground or green wire goes to ground screw. It both wires are brown then connect the wire with the ridges on the outside of the wire to the silver screw as it is the neutral. The wire that is smooth is the black hot wire which connects to the copper screw.
Piggyback off the box for the existing light. Run a wire from the existing junction box to a new junction box (which is placed wherever you want the new fixture). Then, in the existing box, connect the wire coming from the switch, the wire for the existing fixture, and the wire for the new fixture together using wire nuts. Wire up the new fixture, and presto, you have two fixtures on a switch where there was only one before.
bad spark plug wire.
I need a lot more information. I don't know what you mean by four wire plug. What does it look like, what was it used for? What three wire plug are you installing, what does it look like, what is it used for. What color ore the wires?
to the furtherest plug! Plug #1 is probably the longest wire
how to replace plug wire on a toro mower
If it is the same plug every time, I would say the plug or wire is grounding out some where. Try replacing the plug the the wire.
A 2-pole wire will not work on a 3-pole plug. You will need to use a 3-pole wire on a 3-pole plug.
is there a wire by the back bumper i can connect a 7prong outlet to on a e 350 ford van
Change the cord/plug on the stove to a four wire cord/plug. When installing the new plug remove the grounding strip that connects the center lug in the stove wiring block to the frame of the stove. Connect the white wire from the new plug to the center lug. Connect the green wire from the plug to the stove frame.