0
Use a pressure gauge connected into the oil system to see if there is adequate oil pressure. This will tell you if the pump is giving enough pressure. The only way to check the pump to see if the filter is clogged or if the input shaft is worn is to remove it from the engine.
Wiki User
∙ 9y ago
Wiki User
∙ 15y agoif the pump is installed already, turn on your engine and open up your radiator cap. IF you see water circulating, then your pump is working.
If your truck over heats though, that would be your thermostat.
Wiki User
∙ 9y agoYou can test your automotive mechanical fuel pump with a diagnostic tester. The diagnostic tester can tell if the fuel pump is operating properly.
Wiki User
∙ 11y agoalways look at the numbers to see if its working if they stay at the number they were before that means it doesn't work so u have to go to the manager
Add your answer:
Earn +20 pts
What would keep the fuel pump relay from working the fuel pump?
check fuel pump fuse..
New fuel pump is not working in 1993 s10 4.3 L?
check for voltage back where the hot wire connects to the fuel pump. also check groundwire off fuel pump. check fuel pump fuse / check fuel pump relay.
How do you know fuel pump is working?
Do a fuel pressure check-no fuel pressure means defective fuel pump-
1997 Dodge Neon and the fuel pump is not working you replaced it and it still does not pump fuel?
Check to make sure that the pump is getting power to the Neon fuel pump. Check the pump relay, and the pump fuses.
How do you check fuel pump 2001 Malibu?
Disconnect fuel line from pump and start car...if it spits gas out, its working,if no fuel spits out, chances are fuel pump is not pumping fuel.
Where is the fuel shut off valve in a 2002 Pontiac Sunfire?
Not sure what is wrong with your car but if your fuel pump is not working check your fuse for your fuel pump. check your fuel pump relay on your firewall. low or no fuel presser change your filter.
How do you tell if your fuel pump is working?
how do you tell if your fuel pump is working
How do you check the 1984 s10 fuel pump to see if it works?
One way you can check to see if the fuel pump is working is to disconnect the fuel line heading into the injector or the carburetor. Be sure there is nothing that can ignite a flame anywhere near you or the vehicle when doing this, and be sure to be outside in a well ventilated area. Have a friend turn the car over for a snap second. If fuel comes out of the line, the pump is working. If not, the pump needs to be replaced. Be sure to check the entire fuel system out first as you may have a clogged line or clogged fuel filter and the fuel pump is working.
What do you think is the problem if the fuel isn't getting to the part the starts the truck?
Fuel pump not working / replace pump Also need to check fuel pump fuse and relay before replaceing the pump. It would help to know the year and engine size and what you are working on.
No fuel to injectors?
first check to see if fuel filter is clogged.if you have an electric fuel pump, check the fuel pump fuse. next check the fuel lift pump. then check the injector pump
Chevy trailblazer 2004 gauges not working?
If your Chevy trailblazer 2004 gauges are not working, check your fuel pump.
Why Nissan 300zx will not start unless i use starter fluid?
no fuel to the injectors check fuel filter or replace check fuel pump see if it's working check relay
