how do you tighten fan belt on l200
just in front of the altenator, there is a 10mm bolt, tighten that and it will tighten the fan belt
You can tighten a fan belt by tightening the tensioner pulley. Pry to the left on the tensioner pulley and tighten it.
There is no fan belt. The fan is electric.
theres no way to tighten it you will have to buy a new belt
first you have to locate the allready plced soket and then just tighten the belt
To tighten the fan belt on a Renault Master, a person needs to adjust the belt tension wheel. This wheel has a bolt that is inserted in a groove. The bolt can be loosened and then moved to the desired location to tighten the belt.
first u must loosen bolt on power steering belt tensioner till the belt will come off ,then loosen alternator bolts and push alternater till belt is loose enough,then take fan belt off ,install new fan belt,use crowbar on alternator to tighten fan belt,then put power steering belt back on and tighten tensioner till its at spec. then retighteh tensioner center bolt.
There is no fan belt on any year Fiero. Electric fan motor,
There is no fan belt, they have electric fans.
No it has an electric fan.
The 1999 Nissan Quest radiator fan resistor is attached to the back of the fan motor. The resistor should be labeled as such.
If it is a serpentine belt you replace the tensioner pulley
with the automatic belt tensioner..
I need diagram serpentine belt for 1984 Nissan 4,2 L Nissan pick up
Put your new fan belt around the pulleys of your 1992 Chevy Blazer. Tighten the fan belt with the tensioner pulley.
The fan is electric, not belt driven. The serpentine belt is has a spring loaded tensioner. If the belt is loose, the tensioner has failed.
remove your fan shroud then losen the tensioner and remove your belt.
The belt has an automatic spring tensioner and can not be "tightened".
I was told by a mechanic that the fan belt and timing belts on a Pathfinder (mine is a 2001) self-tighten when you accelerate. They do not need to be or do not tighten manually. If your belt is loose, it is probably time to just replace it or it got stretched by someone taking it off and putting it back on or from normal wear and tear. Either way, it needs to be replaced with a new one because once they're stretched, they're no good. I'm not an expert, but this is what I was told by a mechanic.
The fans are electric and do not have a belt The fans are electric and do not have a belt The fans are electric and do not have a belt
take it to a garage and get if fixed
you replace the spring tensioner or the belt because there are no adjustments.
If it is a newer corsa (built in the last 12 years or so) if guessing you mean the alternator belt because it doesn't actually have a fan belt as the fan is driven by a electric motor. To tighten the alternator belt is very easy...Just loosen the two or three bolts holding it on (do not take them right out) pull the alternator so that the belt tightens and then tighten the bolts back up. You may need someone to hold the alternator and belt tight whilst you tighten the bolts back up. If the belt still continues to squeal after you have tightened it a couple of times it means the belt needs replacing.