stick the key in the driver front fender and turn.
The driver's fender keyhole on older corvettes is to turn on and off the factory alarm system. The system is wired to sound an alarm if the hood or doors are dusturbed while the alarm is activated.
try the key if it is a factory alarm try the key if it is a factory alarm
I have a 1984 Corvette and the alarm went off. Is there a switch, key or button that I can turn the alarm off? Thank you! The alarm is reset by inserting the door key into the drivers door and turning the key.
To turn off the factor alarm on a 2001 Toyota Celica, place the key in the door and unlock it. If this does not disconnect the alarm, place the key in the ignition and turn it over.
should be behind the dash on the passengers side.
There should be an idle setting on the side of the rochester carb.
You can unlock the car with the remote or with the key in a door to shut off the factory alarm.
Honda factory alarm systems use a program function. To program the alarm turn the car into the on position and press the lock button. Do this three times in five seconds. Once in program mode and the alarm can be disabled.
You reset the factory alarm by unlocking the doors with a key or remote.
On my 79 Corvette, the alarm system is activated when you lock the car with you key from outside the car. The alarm, if tripped, can only be disactivated by inserting your key in the lock mechanism and turned counter clock wise as if unlocking the door. NOTE, the alarm cannot be acivated by locking the door from the inside without use of your key. Don.
The factory alarm system on a Hyundai can be reset by inserting a key into the on position. Leave the key there until the alarm finishes sounding. Once the alarm shuts off turn the key to the off position and leave it for ten seconds. This procedure will reset the alarm system.
Insert the door key into the driver's door and turn.