Go to www.genvibe.com for all of your answers!!!
This will turn off the beep but the light will still blink.
1) Turn the Car 'ON', but do not start the engine (Leave your foot off the brake). Cycle your trip reset knob until it reads ODO. Turn the ignition back off. Wait a couple of seconds. 2) Make sure seat belt is not fastened 3) Turn the ignition back on, do not start the car (Leave you foot off the break) As soon as you see everything light up, press and hold the trip reset knob and do a long 12 second count. 4) Keep your finger on the trip reset knob. Fasten your seat belt, as soon as you fasten your seat belt, you should see the ODO display go from XXXX miles to "b-on". At that time take your finger off the trip reset knob and press it again. It should cycle to "b-off". You should be all set and turn the ignition off and unfasten your seat belt.
where is the plug to drain the oil in a 2005 Pontiac vibe
There is no aux in on the 2005 Pontiac Vibe. There is a button the says aux but the radio in fact has no aux it.
No such animal . . . Vibe was released in 2003
It is attached to the top of the fuel pump assembly. It is the one with a three wire electrical plug.
In the fuel tank on the pump.
Pontiac Vibe was created in 2002.
it should, i do not think GM dealers have a separate scan tool for the Toyota, I mean Pontiac Vibe
Behind the glove compartment.
NGK Iridium IFR5A
first try cleaning your mass air flow sensor.
where is the internal fuse box on a 2008 pontiac vibe
Changing transmission cables on a 2006 Pontiac vibe