Great news! go to seat belt alarm stop.com
How do you turn off seatbelt alarm Nissan qashqai
leave your seatbelt fastened at all times
All you need is a pass key. Go to shhding .com
Fasten your seatbelt.
Well you should always wear a seatbelt but you can turn off the chime by simply grounding the wire lead at the seatbelt causing the electricity to flow through and the chime to turn off
Go to seat belt alarm.comGo to shhding.com
Maybe your answer is at shhding.com Have a great day!
buckle your seatbelt
If putting on and buckling up your seatbelt does not turn off the alarm, then take it back to the dealer for repair, as this vehicle is still under warranty. If you are just trying to avoid wearing your seatbelt, I will not help you do such a foolish thing. Only a fool would drive around without their seatbelt buckled up.If putting on and buckling up your seatbelt does not turn off the alarm, then take it back to the dealer for repair, as this vehicle is still under warranty. If you are just trying to avoid wearing your seatbelt, I will not help you do such a foolish thing. Only a fool would drive around without their seatbelt buckled up.
You can turn off the seatbelt warning light in your 2006 Ford Explorer, by buckling the seatbelts. When the seat is occupied the warning light will stay on until the seatbelt is buckled.
You buckle up.
You can take it to a Mazda dealer and they can do an update to your car's computer to disable the alarm. I think it's around $50-$75 for them to do that.
If its the same as turning it off which it probably is then just turn the ignition key to on and within 30 seconds clip and unclip your seatbelt 30 times.
Wear your seatbelt !
put ignition key into driver's door to unlock postion.
Put on your seatbelt.
1)begin with the key in any position except for on or start. buckle the driver seatbelt. 2)Turn the key to on but do not start. Wait for the seatbelt light to turn off. 3)within ten seconds, unbuckle and buckle the driver seatbelt at least three times. 4)turn the key to the lock position and wait for a single chime to indicate the program was successful. Another option: Get on the net and type in "seatbelt alarm stop". Or you wear the seat belt like the law says in most areas.
It's a triangular button on the middle of the dashboard, and it will turn off the flashers if the alarm is accidentally set off (the key fob alarm button will only turn off the horn beeping, not the flashers, if you accidentally push the key fob alarm button.)
The sensor is located in the seat. The problem is that if you unplug the sensor the vehicle will not start.
Turn the passenger side airbag to the "off" position using your key. It should be to the right of the radio. By putting on your seatbelt.
Check in your owners manual under the seatbelt section. I have a few years older escape and the process was relatively straight forward. Apply parking brake, turn on battery of car (not engine), wait for the seatbelt light to turn off. Buckle and unbuckle seatbelt 9 times finishing on the umbuckle position. Wait for seatbelt light to flash and stop, and buckle and unbuckle one more time. The seatbelt light will flash rapidly for a few seconds to confirm it's turned off.
Turn power on and set counter to "ODO" Turn power off Turn power on, within 5 seconds, press and hold the trip-reset button After 10 seconds, fasten the seatbelt Release the trip-reset button .. the display should now change to "B-off", turn power off and release the seatbelt.
To turn off the seatbelt chime in 2006-2008 Dodge Rams and some other newer Dodge vehicles, follow this procedure: Get in the vehicle, close the door, put on your seatbelt. Start the engine, wait for the seatbelt light to turn off. Within 30 seconds of the light turning off, unbuckle and re-buckle the seatbelt 4 times, making sure the seatbelt light responds (turns on and off) each time you unbuckle and re-buckle the belt. Ending with the seatbelt BUCKLED, turn off your engine. If done correctly, you will immediately hear one chime to verify the programming. To re-enable the chime, simply repeat this procedure.
You can turn off the 2009 Toyota Camry seatbelt warning light by engaging the seatbelt. You can also remove the seatbelt warning light fuse. Removing the seatbelt warning light fuse is not recommended.