0
How do you understand the leak in vacuum bottle of vacuum circuit breaker without high voltage test?
Wiki User
∙ 9y ago
Understanding the components of the vacuum bottle, one can be in better position of understanding the leakage. Microprocessor monitors leakage in the Vacuum bottle.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
Need of isolator on both side of circuit breaker?
Before anyone is allowed to work on a high-voltage circuit breaker, it must be tripped, electrically isolated, earthed (grounded), barriers/warning notices put in place, and a permit to work document issued by an engineer to the senior member of the maintenance crew. 'Isolation' means a physical (and visible) break in the conductors between the circuit breaker and any potential source of supply -and this is provided by placing isolator switches on each side of the circuit breaker. Without these isolators, the circuit breaker would remain energized, even though the circuit has been broken by the circuit breaker.
What do I do if there is no circuit breaker for outdoor light?
If you have a light that is not being powered through a circuit breaker or fuse, you should call a qualified electrician to remove this circuit from the panel's bus and install a circuit breaker for it. Without an overcurrent protective device (circuit breaker or fuse) you have a potential fire hazard.
Even without current flow there can be voltage in a circuit?
Voltage is potential energy and can exist in a open circuit.
What is exactly answer of circuit breaker?
A circuit breaker is an overcurrent protection device. As well as being able to open and close a circuit supplying its rated load, a circuit breaker must also be capable of interrupting and closing onto an overcurrent, including a short-circuit fault, without damaging itself.
How do you tell if a household circuit breaker is defective?
Safety First! 1) Remove all load devices from the breaker circuit (unplug everything). 2) Reset breaker and observe. No problem, move to step three. 3) Add back one load device at the time. If it's winter, and the device that reproduces the problem happens to be a space heater, stop here, you solved the problem. Move the space heater to a less populated circuit. 4) If you add your I-Pod charger and the breaker trips, you could still need an licensed professional to investigate. In my experience (almost 39 years) doing electrical work, circuit overload is the most common cause.
What is the rating of circuit breaker needed for a 500kva load?
To answer this question a voltage needs to be stated and whether the load is three phase or single phase. Without the voltage the amperage can not be calculated. For single phase, Amps = kva x 1000/voltage, for three phase, Amps = kva x 1000/1.73 x voltage.
What are three important characteristics of electric circuit?
Voltage, frequency, current, impedance, and what the circuit is supposed to do are all important.
Can you increase current in a circuit without change in resistance and voltage?
no it is not possibleAnswerYes, by changing the voltage OR the resistance.
If voltage changes in a ac circuit what happens to current?
Voltage attempts to make a current flow, and current will flow if the circuit is complete. It is possible to have voltage without current, but current cannot flow without voltage. The answer is "yes",voltage remains the same as current moves through the circuit.As the voltage remains constant, current increases in the circuit.
What is the function of an isolator?
To electrically isolate the secondary circuit from the primary circuit, without changing the voltage.
What is rated voltage in open circuit test?
The maximum voltage that the electronic parts can conduct without breaking.
What are the voaltg in isolation transformer?
The function of an isolation transformer is to electrically-isolate the secondary circuit from the primary circuit, without changing the voltage levels. So, its secondary voltage will be the same as the primary voltage.
