Want this question answered?
it does not you will have too put coneckt it your self.
Scan tool or unhook battery.Scan tool or unhook battery.
You can unhook the battery or use a scan tool.You can unhook the battery or use a scan tool.
Why? Just reset it.
You might see a silhouette in a painting in an art museum or even on the wall of a home. You might also see a silhouette on a wall when the light and shadows work together to create this pattern.
You will need to buy a converter that's combines the separate light bulb tail light assembly into a single wire for the turn and brake light.
He could see her silhouette against the setting sun as she stood on the hill. He used a silhouette of himself to cast a shadow on the curtains, fooling the police.
The trailer has a dead short in that right side brake light circuit.
Bad ignition module.
Fix the cause, use a scan tool, or unhook the battery.Fix the cause, use a scan tool, or unhook the battery.
It's a green light that should flash once every time you put your signal light on (either direction). This light tells you that the trailer wiring system that was built into the Disco is working properly. When you tow a trailer and connect the trailer lights to the LR wiring connection next to the hitch, the green "trailer" light on the dash should flash in sync with the signal light arrows every time you put on your signal light. This is telling you that your trailer lights are working properly. If the green "trailer" dash light does not flash, then you might have something wrong with the trailer lights or with the wiring. Unfortunatly Land Rover abandoned this feature on the Disco II.
On a light trailer or small boat trailer you remove the bearing cap, pack it with grease and re-fit it.