Red is positive black is ground.
Yellow= Constant +12volt Red= Switched +12volt Black= -12volt or ground Blue= remote Blue/White= power antenna Pink or Orange= wire color depends on brand but is the dimmer for lights.
Have a light with two wires going from it. Attatch either wire to the sides (+,-) of the battery, with the wire's other end going into a lightbulb.
first of all, you need a bulb, a wire, and ONE light bulb. You clip the wire on the battery and touch the wire on the bottom of the light bulb
Take a battery, a wire and a little light bulb. Put the wire on the flat part of the battery then put the other end of the wire on the side part of the bottom of the light bulb. Put the end of the light bulb on the top of the battery, dont touch the wire to the top when the light bulb is on it because is either shocks you or doesnt work.
INSERT PLUG WIRE IN SERIES WITH NO. 1 CYLINDER AND CONNECT BATTERY + TO RED WIRE AND BLACK WIRE TO BATTERY - TERMINAL
Switch Light Wire battery
you have to have 2 wires. then you put a wire to the positive side of the battery(+) and the other wire to the negative side of the battery(-). then both other ends to the light bulb one end to the side and one end to the bottom. you have to have 2 wires. then you put a wire to the positive side of the battery(+) and the other wire to the negative side of the battery(-). then both other ends to the light bulb one end to the side and one end to the bottom.
You will come off the battery + side with a wire to a fuse, from the fuse to a switch, switch to the light, the other wire from the light goes to ground. Protect the wire from the battery all the way to the light for wear. If you have trouble, or need more info let me know.
Electrons.
(Left front negative light gray) (left front positive tan) (right front negative light green) (right front positive dark green) (ground black) (headlight dimmer wire gray) (power antenna turn on pink (if available) (12volt+ ignition wire yellow ) (12volt+ battery wire orange) (right rear negative light blue) (right rear positive dark blue) (left rear negative yellow) (left rear positive brown) make sure u mark the left rear negative wire its the one between the dark blue and brown wires on the harness just so u dont mix it up with the ignition wire
Get your bulb, it should be a very small wattage (weak) one, get your battery and wires, connect one wire to plus side of abttery and other wire to minus side of battery, then connect to the bulb, you may have to play around a bit to find a connection that produces light.
you put the end of the wire at the bottom of the battery and you get the other end of the wire and rap it with the lightbolb and you put the lightbolb at the top of the battery