Go to wal mart or your local stereo shop and pick up a factory plug in harness for your car, unplug your factory radio and plug in the harness, then you just wire in the aftermarket radio to the open end of the harness.....no cutting wires so you can put the factory radio back in by just unplugging the new one and replacing it
wire crossed or bare wire
The stereo wire colors on a 1988 Toyota Camry are similar to other Toyota models. The radio constant 12v+ wire is blue/yellow, the radio switched 12v+ wire is gray, the ground wire is brown, and the illumination wire is green. The radio power antenna trigger wire is black/red. The left front speaker wire (+) is pink and the left front speaker wire (-) is purple. The right front speaker wire (+) is light green, the right front speaker wire (-) is blue. The rear left speaker wire (+) is black and the rear left speaker wire (-) is yellow. The rear right speaker wire (+) is red and the rear right speaker wire (-) is white.
if you have the correct tools and professional help it should work.
Seeing what the wires are would allow a person to know which wire is which on a 1988 Toyota. It would be helpful to see what the wires are to know what they are for.
The 1986 Toyota Pickup wiring diagram can be found here: http://www.installdr.com/Harnesses/Toyota-Wiring.pdf
the vss wire is located as the purple/white wire above the radio, the harness plugging into the clock. tap into the purple/white wire for your aftermarket headunit vss wire.
like any other car like any other car
it could be anything. a breaker, a wire, or a battery.
If the radio is not working in a 2005 Toyota Corolla the wire harness may be damaged. The radio fuse may also be damaged and should be checked as well.
When fixing parts on a car, it can come in handy to have a diagram of that part. The wiring diagram for a 1988 Mazda 626 radio can be found in the cars maintenance manual.
what is the name for drive by wire in toyota