How do you wire the back speakers into an aftermarket stereo on a 1994 Hyundai Excel?

Answer 1

1. take a look at the wiring codes here: http://www.faqfarm.com/Q/What are car stereo wiring color codes for a Hyundai

2. find the wires in your dash that match the rear speakers,

"Speakers:

Grey = Front Right +

Grey/Black = Front Right -

Green = Front Left +

Green/Black = Front Left -

Blue = Rear Right + <<<

Blue/Black = Rear Right - <<<

Brown = Rear Left + <<<

Brown/Black = Rear Left - " <<<(from above link)

3. and then match them up to the new wires on your aftermarket conector using the instructions from your new aftermarket sterio installation guide you should be able to find the new wire colour codes.

• if not, they are usually like this:

What wire - Equivalent Wire Color:

Right Front Speaker (+) - Gray

Left Front Speaker (+) - White

Right Front Speaker (-) - Gray w/ Black Stripe

Left Front Speaker (-) - White w/ Black Stripe

Ground Wire - Black

+12 Volt Ignition Wire - Red

Power Antenna Wire - Blue

Right Rear Speaker (+) - Purple

Right Rear Speaker (-) - Purple w/ Black Stripe

+12 Volt Battery Wire - Yellow

Left Rear Speaker (+) - Green

Left Rear Speaker (-) - Green w/ Black Stripe

3. connect the 2 matching wires with a wire connector

i hope this has helped,

PeterK.

You can also use the stock wires and just cut them and then either crimp them or use a soldering iron to join them.

This is what i did with mine and they work fine.

Just test the speakers work before you do this by touching the wires to the speaker.